advertisement
Further Functions
Altering MasterCode2
Press the OK and abort keys √ X
Enter active MasterCode2
Notice: 3, 5, 1, 9, 7 is only an example code!
Press the OK key
3 5
√
1 9 7
Press 2
(“2” for MasterCode2) 2
Press the OK key √
Enter new MasterCode2
4
Notice: 4, 8, 2, 7, 3 is only an example code!
Press the OK key
Enter new MasterCode2 one more time 4
8
√
8
2
2
7 3
7 3
Press the OK key √
13
Further Functions
Programming MasterCode1
MasterCode1 is not activated in the factory and must be programmed by the operator.
Notice: An identical code for MasterCode1 and MasterCode2 is not permitted.
Press the OK and abort keys √ X
Enter active MasterCode2 3
Notice: 3, 5, 1, 9, 7 is only an example code!
5
Press the OK key √
1 9 7
2 Press 1
(“1” for MasterCode1)
Press the OK key √
Enter new MasterCode1
9
Notice: 9, 0, 6, 0, 9 is only an example code!
0
Press the OK key √
6 0 9
Enter new MasterCode1 one more time 9 0 6 0 9
Press the OK key √
14
Further Functions
Opening using MasterCode1
After programming, a locker can be opened with the help of MasterCode1.
Enter MasterCode1
Then press the OK key
3
√
5 1 9 7
Release using MasterCode2
If a compartment that is fitted with a SAFE-O-TRONIC® LS 100 is opened using MasterCode1, it stays blocked for the entry of a UserCode. The SAFE-O-TRONIC® LS 100 then has to be released again using
MasterCode2.
9 0 6 0 9
Enter active MasterCode2
Notice: 3, 5, 1, 9, 7 is only an example code!
√
Press the OK key
The blocked SAFE-O-TRONIC® LS 100 is now released again for further operation.
15
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
