INTRODUCTION TO YOUR NAVMATE SOFTWARE. Advent TOCLS-OE100, TOCMR-OE100, TOCLJ-OE100

Introduction to Your NavMate Software

NavMate software provides turn-by-turn visual and voice assistance to direct you to your selected destination. The software quickly calculates step-by-step directions to any destination available on the included navigation map.

The NavMate software uses Global Positioning System (GPS) satellites, and a digital roadway map database to calculate and display travel directions. The system’s

GPS antenna receives signals from a constellation of 24 satellites orbiting the earth and uses the strongest of signals, to determine your position to within meters.

Vehicle Position

The NavMate software’s computer considers vehicle speed and heading changes, together with longitude and latitude information, to accurately determine vehicle heading and position on a digital map.

Signals from GPS satellites are used to determine the vehicle location. Three

(good) or four (best) satellites must be received to accurately determine location.

The GPS reception status is indicated by the GPS symbol on the map.

Map and Information Database

The map database used by your NavMate software was created using high-resolution aerial and land based data collection.

Car navigation maps are frequently updated. While the database was judged to be as accurate as possible at the time of its release, a map database can never be

100% accurate. Road information that is maintained in the map databases, such as turn restrictions or road names may change over time.

7