Uploading Web pages to the AV2/PRO. Crestron AV2

2-Series Integrated Dual Bus Control System

“Send Program” Window

Crestron AV2 & PRO2

Another way to verify that the program has been transferred successfully is to select

Report Program Information on the Viewport Functions menu. Program information is also displayed in the Viewport console whenever power is removed and re-applied to the AV2/PRO2.

Uploading Web pages to the AV2/PRO2

The AV2/PRO2 provides a built-in Web server for e-Control applications. The

AV2/PRO2 allots 2.5 MB of memory for “user files” such as Web pages, mailbox, and the compiled SPZ file. For detailed information, refer to “Uploading Web

Pages” in the Crestron e-Control Reference Guide, Doc. 6052. The latest version is available as a PDF on the Crestron website (www.Crestron.com).

NOTE: If you have a Compact Flash reader/writer drive on your PC, you can load

HTML pages to a Compact Flash card using Windows Explorer or any other file transfer method. When the card is inserted into the Memory Expansion slot of the control system, the Web pages will be recognized as valid for e-Control so long as they are located in a directory called HTML. (The HTML directory must also include a configuration file called _config_ini_, which identifies the default page— contact Crestron for further information.)

NOTE: For IP setup information, refer to the Operation & Installation Guide for the

2-Series Ethernet Interface Expansion Cards: C2ENET-1 & C2ENET-2, Doc. 5962.

The latest version is available as a PDF on the Crestron website

(www.Crestron.com).

Uploading Touchpanel Projects via the AV2/PRO2

You can use a connection to the AV2/PRO2 to upload VisionTools Pro-e projects to any Cresnet touchpanel. Compiled projects for TPS panels are contained in VTZ files; projects for all other touchpanels are contained in HEX files.

Before uploading, open Viewport and click Diagnostics | Report Network Devices to verify that the touchpanel is being detected by the control system. (As with any network device, touchpanels must be identified by unique hexadecimal network IDs.

These IDs are set in the SIMPL Windows program.)

24 • Integrated Dual Bus Control System: AV2 & PRO2 Operations Guide - DOC. 5957A