LEDs on the Front of the Modem. Ambit U10C007


Add to my manuals
50 Pages

advertisement

LEDs on the Front of the Modem. Ambit U10C007 | Manualzz

LEDs on the Front of the Modem

_____Ethernet____

pwr usb sync ready wlan 1 2 3 4

pwr: Indicates that the wireless cable modem has successfully completed internal power-on tests.

usb: Indicates connectivity between the USB port on the wireless cable modem and a PC’s USB port.

sync: Indicates the connection status between the wireless cable modem and the cable network. The LED is lit when the wireless cable modem has established a downstream channel with the cable service provider’s Cable Modem Termination

System (CMTS).

ready: Indicates that the wireless cable modem has completed the ranging/registration process and is ready to send/receive data.

wlan: Indicates that at least one wireless client is linked to the wireless cable modem.

Enet 1, 2, 3, 4: Indicates connectivity between the Ethernet port on the wireless cable modem and the Ethernet port on a PC or Mac. This LED blinks when the wireless cable modem is transferring or receiving data over the Ethernet cable.

Installation problems with the wireless cable modem are commonly due to the cable network and its topography. LEDs on the front panel of the wireless cable modem reveal operational status and help you determine problem areas.

Connectors on the Back of the Modem

This list of connectors describes where to connect the cables and power adapter when installing the wireless cable modem.

User’s Guide 25

Ethernet 10/100

PWR

USB

Cable

4 3 2 1

1. PWR: This is where you plug the included power adapter. Remember to use only the power adapter that came with the wireless cable modem.

2. Ethernet 10/100 Port 1, 2, 3, 4: This is where you plug the Ethernet cable. The other end connects to the Ethernet port on the PC or NIC

3. USB Port: This is where you plug the included USB cable. The other end connects to the USB port on your PC.

4. Cable Connector: This is where you connect the coaxial cable (not included) that leads to the cable splitter (not included) or the cable wall outlet.

User’s Guide 26

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What are the features of Ambit U10C007?
It supports 802.11b/g wireless connectivity, offers transmission rates up to 54Mbps, has a two-way design for sending and receiving data, utilizes cable bandwidth for faster speeds, operates through a USB connection, and complies with DOCSIS standards.
What is the maximum speed that Ambit U10C007 can achieve?
It supports speeds of up to 38 megabits per second (Mbps).
What factors can affect the speed of Ambit U10C007?
Speed may vary based on computer equipment, software applications, network traffic, and limitations set by the cable service provider.
How does Ambit U10C007 connect to the Internet?
It connects through an active internet connection provided by a cable service provider.
What is required to set up Ambit U10C007?
You'll need a computer with a USB port, an active cable internet connection, supplied items like the power adapter and Ethernet cable, and optionally a coaxial cable if the modem is not pre-connected.