Using the unit. Aethra Vega Star Gold

Using the unit

This chapter explains the procedures to follow when using the Vega Star Gold e.g. making a connection (calling or receiving a call).

It is assumed that the system has been installed correctly and that the MAIN MENU is displayed.

Switching the unit on

When switching the unit on for the first time, the following page will appear:

The user can now select the desired language

Making a call

Once the Vega Star Gold unit has been switched on, the main user interface is displayed.

There are three ways to make a call

• From the Phonebook

• Audio and Video

• Audio only

13

Calling from the phonebook

To select a number quickly, a Phonebook is available where data about frequently called terminals can be stored. To carry out a call to a memorized address, simply select the required name from the list.

Use the arrow keys on the remote control to select the PHONEBOOK icon and press

OK

Scan the Phonebook to find the initial required

Choose the name using the arrow keys on the remote control. Press OK to select a name.

To make the call select the CALL icon and press OK

To disconnect the call select the DISCONNECT icon and press OK (the system will then ask for confirmation).

14

Making an audio/video call

Use the arrow keys on the remote control to select the VIDEO icon in the main menu and press OK.

Select the type of call (ISDN or IP or MCU) and press OK.

Select the call rate and press OK.

If necessary, access the configuration menu with the OK button after selecting the

CONFIGURE icon.

Enter the number to be called with the numeric keypad on the remote control.

Enter the name of the person to be called with the virtual keyboard (IP only).

Use the arrow keys to select the letter required and press OK.

Select ESC and press OK to exit.

Select CALL to send the call and press OK.

Select DISCONNECT and press OK to end the connection (the system asks you to confirm disconnection).

NOTE:

When you reach step 4, you can select CALL and press OK. The system then opens a page displaying last dialed numbers. You can select a number to dial or modify it before making the call.

15

Making an audio call

You can use Vega Star Gold as a standard telephone to make an audio call. To do this, select the AUDIO ONLY icon on the main menu and press OK.

Dial the number using the numeric keypad on the remote control.

Select CALL to send the call and press OK.

Select DISCONNECT and press OK to end the connection (the system asks you to confirm disconnection).

Receiving a call

If the main page is displayed

16