Troubleshooting. ACU-RITE 00821SBDI
Add to My manuals12 Pages
AcuRite 00821SBDI is a weather forecaster that provides accurate weather forecasts for your specific location. It features a self-calibrating forecasting algorithm that analyzes changes in pressure to determine your altitude and generate a personalized forecast for the next 12 to 24 hours. The device also displays indoor and outdoor temperature and humidity levels, and includes a clock with alarm. With its wireless sensor and easy-to-read display, the AcuRite 00821SBDI is a valuable tool for staying informed about the weather conditions in your area.
advertisement
Troubleshooting
Problem
No outdoor sensor reception no bars
Outdoor temperature is flashing or showing dashes
Inaccurate temperature or humidity
Inaccurate forecast
Possible Solution
If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor.
The units must be within 165 ft (50 m) of each other.
• Make sure both units are placed at least 3 feet
(.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).
• Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable batteries. NOTE: It may take up to 20 minutes for display unit and sensor to synchronize after batteries are replaced.
Flashing of the outdoor temperature is generally an indication of wireless interference.
1. Bring both the sensor and display unit indoors and remove at least one battery from each.
2. Reinstall the battery in the outdoor sensor.
3. Reinstall the battery in the display unit.
4. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection.
• Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents (see page 6).
• Make sure both units are positioned away from moisture sources (see page 6).
• The Weather Forecast icon predicts conditions for the next 12 to 24 hours, not current conditions.
• Has Learning Mode icon disappeared from the display unit? Learning Mode must complete before forecast and pressure will be accurate.
• Allow unit to run continuously for 33 days. Battery removal or resetting the display unit will restart
Learning Mode. After 14 days, forecast should be fairly accurate, however Learning Mode calibrates for a total of 33 days.
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
Display screen not working
If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
8
advertisement
Related manuals
advertisement
Table of contents
- 2 Unpacking Instructions
- 2 Package Contents
- 2 Product Registration
- 2 Features & Benefits: Sensor
- 3 Features & Benefits: Display
- 4 Setup
- 4 Install or Replace Batteries
- 5 Set the Time & Units
- 6 Placement Guidelines
- 7 Using the Forecaster
- 8 Troubleshooting
- 9 Care & Maintenance
- 9 Specifications
- 9 FCC Information
- 10 Customer Support
- 10 Warranty