5. BASIC SET UP S-VIDEO. Altech UEC DT3900RF

5. BASIC SET UP S-VIDEO

Uses the single S-VIDEO connector for S-VIDEO with the Red and White

RCA AUDIO R & L for audio. All video outputs are active.

5. 1Prepare your equipment

Ensure that the power leads to both the TV set and the Set Top Box are unplugged whilst making AV connections.

5.2. Connecting Video and Audio

Video

Connect the S-VIDEO output from your receiver to the S-VIDEO input of the TV

Audio a) Connect the Red and White AUDIO L&R output from your receiver to

2 x RCA leads connect the other end of each RCA lead to the corresponding Audio input connectors on your TV set.

5.3. Connect the antenna…

To the “ANTENNA IN” connection on the rear of your receiver.

5.4. Mains Power- Turn all your devices at the mains power & you are ready to scan.

13