Ending Set-up. Arkray GLUCOCARD 01-mini, Glucocard X-Meter
Add to My manuals76 Pages
The Arkray GLUCOCARD 01-mini is a blood glucose monitoring system that measures glucose in fresh capillary whole blood samples drawn from the fingertips or palm. It features a large display screen for easy reading and interchangeable colored faceplates for personalization. The device requires only a tiny 0.3 µL blood sample and provides accurate results in just 5 seconds. It also has a memory function that stores up to 300 test results, allowing you to track your blood glucose levels over time.
advertisement
Ending Set-up
To make further changes to set-up settings, press the button while “End” is displayed. This will bring up the Audible Beep set-up screen. You can then move through the set-up mode and adjust any settings that you wish.
If you are done with set-up, press the
button while “End” is displayed.
This confirms all settings and turns the meter off.
The meter will turn off automatically
3 minutes after “End” is displayed.
<Power OFF>
Beep
24
advertisement
Related manuals
advertisement
Table of contents
- 5 Introduction
- 15 Meter Set-up
- 18 Audible Beep
- 20 Year
- 24 Ending Set-up
- 25 Performing a Control Solution Test
- 32 Troubleshooting Control Solution Test
- 35 Blood Glucose Testing
- 35 The Lancing Device
- 38 Getting a Drop of Blood
- 40 Performing a Blood Glucose Test
- 46 Alternate Site Testing (AST)
- 60 Recalling Results - Entering Memory Mode
- 64 Maintenance
- 64 Cleaning
- 65 Storage and Handling
- 66 Display Screen and Error Messages
- 71 Product Information
- 71 Product Specifications
- 72 Warnings, Precautions & Limitations
- 75 Warranty