advertisement
26 Product Manual - Hawk 1LP Family SCSI-2 (Volume 1), Rev. A
_______________________________________________________________________________________
7.4.4.2
Vibration a.
Operating
The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding
5-22 Hz @ 0.040 inches (1.03 mm) displacement
22-400 Hz @ 1.0 g
Vibration may be applied in the X, Y, or Z axis.
b.
Nonoperating
The limits of nonoperating vibration shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives.
The drive shall not incur physical damage or degraded performance as a result of continuous vibration not exceeding
5-22 Hz @ 0.081 inches (2.05 mm) displacement
22-400 Hz @ 2.00 g
Vibration may be applied in the X, Y, or Z axis.
7.4.5
Air cleanliness
The drive is designed to operate in a typical office environment with minimal environmental control.
7.5
7.5.1
Electromagnetic compatibility
Electromagnetic susceptibility
As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of the system integrator to perform those tests required to ensure that equipment operating in the same system as the drive does not adversely affect the performance of the drive. See section 6.1.2, and see Table 7.2-1, DC Power Requirements.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 Scope
- 10 Applicable standards and reference documentation
- 10 Standards
- 10 Applicable reference documents
- 11 General description
- 13 Features
- 13 Performance
- 13 Reliability
- 14 Unformatted and formatted capacities
- 14 Options (factory installed)
- 14 Optional accessories (user installed)
- 15 Installation
- 16 Performance characteristics
- 16 Internal drive characteristics (transparent to user)
- 16 SCSI Drive Seek and write performance characteristics (visible to user)
- 16 Seek command execution time
- 17 Format drive command execution time
- 17 Read data command execution time
- 17 Write data command execution time
- 18 Generalized performance characteristics
- 19 Start/stop time
- 20 Prefetch/multi segmented cache control
- 20 Cache operation
- 21 Prefetch operation
- 22 Caching write data
- 22 Synchronized spindle operation
- 25 Reliability specifications
- 25 Error rates
- 25 Read errors
- 25 Environmental interference
- 26 Write errors
- 26 Seek errors
- 26 Reliability and service
- 26 Mean time between failure
- 26 Preventive maintenance
- 26 Service life
- 27 Service philosophy
- 27 Installation
- 27 Service tools
- 27 Product warranty
- 28 Physical/electrical specifications
- 28 AC power requirements
- 28 DC power requirements
- 28 Conducted noise immunity
- 29 Power sequencing
- 29 12 V - current profile
- 30 Heat/power dissipation
- 30 Environmental limits
- 30 Temperature
- 31 Relative humidity
- 32 Effective altitude (sea level ref)
- 32 Shock and vibration
- 34 Air cleanliness
- 34 Electromagnetic compatibility
- 34 Electromagnetic susceptibility
- 35 Mechanical specifications
- 37 Drive orientation
- 37 Cooling
- 37 Drive mounting
- 38 Media characteristics
- 38 Media description
- 39 Defect and error management
- 39 Drive internal defects/errors
- 39 SCSI systems error considerations
- 40 Option/configuration headers
- 40 Drive ID/Option select header
- 43 Synchronized spindles interface
- 43 10.2.1 Electrical description
- 45 Grounding
- 46 Interface requirement
- 46 General description
- 46 SCSI interface messages supported
- 47 SCSI interface commands supported
- 49 11.3.1 Inquiry data
- 50 11.3.2 Mode sense data
- 55 SCSI bus conditions and miscellaneous Features supported
- 56 Synchronous data transfer
- 56 11.5.1 Synchronous data transfer periods supported
- 56 11.5.2 REQ/ACK offset
- 56 Physical interface
- 58 11.6.1 DC cable and connector
- 58 11.6.2 Physical characteristics
- 59 11.6.3 Mating connector requirements
- 66 11.6.4 Electrical description
- 70 Disc drive timing
- 72 Options
- 72 Front Panel
- 72 Single unit shipping ppack
- 73 Accessories
- 73 Front panel kit
- 73 Installation manual
- 74 Seagate support services
- 75 Seagate peripheral family