Set Processor Panel Address Switches. AMX MAX-CSD 10

STEP 8

Set Processor Panel Address Switches

If there is only one processor panel in the system, leave its address as shipped (default is address 1).

If there are two or more processor panels on the Interprocessor Link, each must have a unique address, ranging from 1 to 32. The

Address Switches may have been pre-set to give the address shown on the job drawings.

Use the Address Switch Settings Chart, on the previous page, to see how to set the Address

Switches to get a specific address.

CSD Link D

1 2 3 4 D

CSD Link A

1 2 3 4 D

UI Link

1 2 3 4 D

CSD Link E

1 2 3 4 D

CSD Link B

1 2 3 4 D

AUX Link

1 2 3 4 D

CSD Link F

1 2 3 4 D

CSD Link C

1 2 3 4 D

IP Link

1 2 3 4 D

RS-232

Telco

PP Link

1 2 3 4 D

Ethernet

ACT LNK

G7000 ADDR

ON

ON

Panel Address

1 2 3 4 5 6 7

Processor Panel - GRAFIK 7000P shown.

R

Installation of GRAFIK5000 / GRAFIK6000 / GRAFIK7000 System 17