- Home
- Domestic appliances
- Large home appliances
- Dishwashers
- CMA Dishmachines
- CMA-180TALL
- Owner's manual
2.2.4. Exhaust Fan Control Kit p/n 17528.00 Instructions. CMA Dishmachines CMA-180TALL
Add to my manuals21 Pages
CMA Dishmachines CMA-180TALL is a hot water sanitizing, single rack, door-type dishmachine that utilizes recirculated wash water and fresh water final rinse. It features a self-contained booster heater, automatic operation, and easy installation. With a cycle time of 58 to 55 seconds, it can handle up to 60 racks per hour, making it suitable for various commercial kitchens and food service establishments. The CMA-180TALL is designed to provide efficient and hygienic dishwashing, ensuring that dishes are properly sanitized and ready for use.
advertisement
2.2.4. Exhaust Fan Control Kit p/n 17528.00 Instructions
1. Connect terminal #1 on timer block (Red) to heater contactor terminal marked L3
2. Connect terminal #3 on timer block (Blue) to heater contactor terminal marked L1
3. Connect terminal #2 on timer block (Red/Black) to fan contactor coil terminal.
4. Connect terminal #3 on timer block (Blue) to other fan contactor coil terminal
5. Connect terminal # 3 on timer block (Blue) to sixth cam top terminal on timer assembly.
6. Connect terminal #6 on timer block (Blue) to sixth cam middle terminal on timer assembly.
7. Connect power source of 220 Vac or 110 Vac to L1 and L2 (N) on fan control contactor.
8. Connect exhaust fan motor to T1 and T2 on other side of fan control contactor.
MODEL CMA-180 INSTALLATION & OPERATION Rev. 2.08
Page 7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 SPECIFICATIONS
- 3 CMA-180/CMA-180T
- 5 GETTING STARTED
- 5 Introduction to CMA
- 6 2.2. Receiving and Installation
- 6 2.2.1. Electrical
- 6 2.2.2. Plumbing
- 6 2.2.3. Chemical Dispensers
- 7 Low Temperature Applications
- 8 2.2.4. Exhaust Fan Control Kit p/n 17528.00 Instructions
- 9 2.2.5. Water Tempering Kit (Optional)
- 10 2.2.6. Installation Checklist
- 10 2.2.7. Machine Start-Up Procedures for High Temp machines
- 12 2.2.8. Electrical Requirements
- 13 WIRING OPTIONS
- 14 QUICK SERVICE GUIDE
- 15 INITIAL PARTS KIT P/N
- 16 AUTO-FILL SOLID STATE TIMER
- 17 WIRE DIAGRAM FOR CMA-180 WITH BOOSTER HEATER
- 18 WIRE DIAGRAM FOR CMA-180 BOOSTER ONLY
- 19 WIRE DIAGRAM FOR CMA-180 WITHOUT BOOSTER HEATER
- 20 WIRE DIAGRAM FOR 480V 180 WITHOUT BOOSTER HEATER
- 21 WIRE DIAGRAM FOR 480V 180 WITH BOOSTER HEATER