advertisement
6
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models.
10-Cycle Models
2
1
5
4
6 7
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name.
9-Cycle Models
2
1
3
5
4
6 7
3
1
2
POWER/CANCEL
Touch to turn the dryer on and off. Touch to stop/cancel a cycle at any time.
CYCLE CONTROL KNOB
Use your dryer’s cycle control knob to select available cycles on your dryer. Turn the knob to select a cycle for your laundry load. See “Cycle Guide” for detailed descriptions of cycles.
3
4
START
Touch and hold until the LED comes on to start a cycle, or touch once while a cycle is in process to pause it.
TIMED DRY ADJUST for TIMED CYCLES
Use + and – with Timed Cycles to increase or decrease the length of a Timed Dry or Rapid Dry cycle.
5
6
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and the Estimated Time Remaining (for Sensor Cycles) or actual time remaining (for Timed Cycles) will be displayed.
Touch the setting names next to the display to adjust settings.
See “Cycle Guide” for available settings on each cycle.
Not all settings are available with all cycles.
Temperature
When using Timed Cycles or Custom Refresh, you may select a dry temperature based on the type of load you are drying. Use the warmest setting safe for the garments in the load. Follow garment label instructions.
NOTE: Sensor Cycles use a preset temperature that is not adjustable.
Dryness Level
You may adjust the Dryness Level on Sensor Cycles
(except for the Sanitize cycle), if desired.
NOTE: Dryness Level is for use with Sensor Cycles only.
Wrinkle Prevent
If you will be unable to remove a load immediately, touch
Wrinkle Prevent to add up to 120 minutes of periodic tumbling to help reduce wrinkling. On some cycles, you may select the “With Steam” setting to add a short steam cycle after 60 minutes to help smooth out wrinkles.
Garments
This setting allows you to enter the number of items you are placing in the dryer for the Custom Refresh cycle.
The number of items determines the cycle time.
OPTIONS
Use to select available options for your dryer. Not all cycles and options are available on all models.
Drum Light
Touch to turn the LED drum light on or off. The light will also turn on when the door is open, and turn off automatically after about 5 minutes.
Reduce Static
Touch to add the Reduce Static option to selected
Sensor cycles (see “Cycle Guide”). The dryer will automatically tumble, pause, and introduce a small amount of moisture into the load to help reduce static. This option adds approximately 8 minutes to the total cycle time.
7
Steam Boost
Steam Boost adds steam to the end of the Heavy Duty,
Bedding, Normal, or Garments cycle to help smooth wrinkles. Steam Boost can be used with High or
Medium heat settings.
Damp Dry Signal
Touch to select the Damp Dry Signal. When selected, a series of beeps will sound when the load is damp, but not completely dry. This will allow you to take clothes out of the load that do not need to dry completely. This option is available on Heavy Duty, Normal, Bedding, and Delicates cycles.
Cycle Signal
Use this to turn the signal indicating the end of a drying cycle on or off.
NOTE: You may also turn off the tones that sound when a feature, setting, or option is touched. Touch and hold
Cycle Signal for about one second to turn sounds on or off.
Control Lock
Use to lock the controls of the dryer and avoid an accidental change in cycle options or preferences during a drying cycle.
NOTE: The Control Lock function may be enabled when recovering from a power failure. To unlock the control, touch and hold CONTROL LOCK for at least 3 seconds.
CYCLE STATUS LIGHTS
The indicator bar on the right side of the control will let you know what stage of the drying cycle is in process. For more information on each stage, see “Cycle Status Indicators.”
7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project