Port Mapping. ACTi KCM-3211

Firmware User’s Manual V5.05.07

Port Mapping

Click the [Port Mapping] item to display the “Port Mapping Page”. Refer to the table below for how to configure each setting.

Parameters

HTTP port

Search server port1

Search server port2

Video server port

Description

Select the port assigned for HTTP protocol access

Select the first port used by server search applications to detect this IP device. (e.g. IP utlity)

Select the first port used by server search applications to detect this IP device. (e.g. IP utlity)

Select the port used to support video control function by application programs. (e.g. NVR)

22 www.acti.com

Firmware User’s Manual V5.05.07

Streaming server port

Select the port used by this IP device for Video Streaming.

(TCP Only)

Video Multicast Port of

Enable/disable multicast audio streaming media 1

RTSP port

RTP Multicast Video

Port for Media1

Select the port assigned for RTSP protocol access

Select the port for the multicast video streaming of media1 via

RTP protocol

RTP Multicast Audio

Port for Media1

Multicast IP

Multicast TTL

IGMP

Select the port for the multicast audio streaming of media1 via

RTP protocol

Select the multicast IP. Default settings is 228.5.6.1

Select the multicast TTL. Default setting is 255.

Select video type connected to the video-in of this IP device. If you use an incorrect video type, some images might be lost.

Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the parameters.

23 www.acti.com

Firmware User’s Manual V5.05.07

ToS

Click the [ToS] (Type of Service) item to display the “ToS Page”. Refer to the table below for how to configure each setting.

Parameters

TOS (type of service)

TOS priority

Description

Select whether to add the TOS tag onto the streaming data.

Streaming data with a higher priority TOS tag will be transmitted first when compared with other data.

S elect the TOS tag‟s priority to be added onto the streaming. You can select between

1.Minimize-Delay

2.Maximize-throughout

3.Maximize-Reliability

4.Normal-Service

Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the parameters.

24 www.acti.com