2 Paper tray
●
Supported paper sizes
●
Supported paper types
●
Load the input trays
ENWW 9
Supported paper sizes
This product supports a number of paper sizes, and it adapts to various media.
NOTE: To obtain best results, select the correct paper size and type in the print driver before printing.
Table 2-1 Supported paper and print media sizes
Size and dimensions Tray 1 Tray 2 Optional 500sheet Tray 3
Duplexer
Letter
216 x 279 mm (8.5 x 11 in)
Legal
216 x 356 mm (8.5 x 14 in)
A4
210 x 297 mm (8.27 x 11.69 in)
A5
148 x 210 mm (5.83 x 8.27 in)
A6
105 x 148 mm (4.1 x 5.8 in)
B5 (JIS)
182 x 257 mm (7.17 x 10.12 in)
Executive
184 x 267 mm (7.24 x 10.51 in)
Postcard (JIS)
100 x 148 mm (3.9 x 5.8 in)
Double Postcard (JIS)
148 x 200 mm (5.8 x 7.9 in)
16K
184 x 260 mm (7.2 x 10.2 in)
16K
195 x 270 mm (7.7 x 10.6 in)
16K
197 x 273 mm (7.8 x 10.8 in)
8.5 x 13
216 x 330 mm (8.5 x 13 in)
10 Chapter 2 Paper tray ENWW
Table 2-1 Supported paper and print media sizes (continued)
Size and dimensions Tray 1 Tray 2
Envelope Commercial #10
105 x 241 mm (4.13 x 9.49 in)
Envelope B5 ISO
176 x 250 mm (6.7 x 9.8 in)
Envelope C5 ISO
162 x 229 mm (6.93 x 9.84 in)
Envelope DL ISO
110 x 220 mm (4.33 x 8.66 in)
Envelope Monarch
98 x 191 mm (3.9 x 7.5 in)
Custom
76 x 127 mm to 216 x 356 mm
(3.0 x 5.0 in to 8.5 x 14 in)
Optional 500sheet Tray 3
Duplexer
ENWW Supported paper sizes 11
Supported paper types
For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/support/ ljm425series .
Paper type (control panel) Paper type (print driver) Tray 1 Tray 2 Optional
500-sheet
Tray 3
Duplexer
LABELS
LETTERHEAD
PREPRINTED
PREPUNCHED
COLOR
ROUGH
BOND
RECYCLED
ENVELOPE
PLAIN
HP EcoSMART Lite
LIGHT 60-74 G
MID-WEIGHT 96-110 G
HEAVY 111-130 G
EXTRA HEAVY 131–175 G
TRANSPARENCY
Plain
HP EcoSMART Lite
Light 60-74g
Mid-weight
Heavy 111–130g
Extra heavy 131–175g
Monochrome Laser
Transparency
Labels
Letterhead
Preprinted
Prepunched
Colored
Rough
Bond
Recycled
Envelope
12 Chapter 2 Paper tray ENWW
Load the input trays
Load Tray 1
1.
Open Tray 1, and pull the tray extension away from the product.
2.
For long paper, flip out the extension to help hold the paper in the tray.
ENWW Load the input trays 13
3.
Place the paper stack into Tray 1, and slide the paper guides so that they are against the sheets.
4.
Feed the paper stack into the tray as far as it will go.
Load Tray 2
1.
Pull the tray out of the product.
14 Chapter 2 Paper tray ENWW
2.
Slide open the paper length and width guides by pushing outward on the blue tabs.
3.
To load Legal-size paper, extend the tray by pressing the release button at the back of the tray inward and pulling the back of the tray out.
NOTE: When loaded with Legal-size paper, the tray extends from the rear of the product approximately 70 mm (2.75 in).
4.
Place the paper in the tray and make sure that it is flat at all four corners. Slide the paper length and width guides so that they are against the stack of paper.
ENWW Load the input trays 15
5.
Push down on the paper to make sure that the paper stack is below the paper limit tabs on the right side and rear of the tray.
6.
Slide the tray into the product.
Load optional Tray 3
1.
Pull the tray out of the product.
16 Chapter 2 Paper tray ENWW
2.
Slide open the paper length and width guides by pushing outward on the blue tabs.
3.
To load Legal-size paper, extend the tray by pressing the release button at the back of the tray inward and pulling the back of the tray out.
NOTE: When loaded with Legal-size paper, the tray extends from the rear of the product approximately 70 mm (2.75 in).
4.
Place the paper in the tray and make sure that it is flat at all four corners. Slide the paper length and width guides so that they are against the stack of paper.
ENWW Load the input trays 17
5.
Push down on the paper to make sure that the paper stack is below the paper limit tabs at the rear of the tray.
6.
Slide the tray into the product.
18 Chapter 2 Paper tray ENWW
