SECTION 3 Aiming the Camera. Sharp CD700 Series, CD601 Series, CD600 Series, CD600 - B/W - Fax

SECTION 3: AIMING THE CAMERA

SECTION 3

Aiming the Camera

1. Connect the video cable from the camera to a test monitor or to the BNC input on the

DVR.

2. Apply 12 Vdc power to the camera to power it on.

3. Unscrew the bezel until the camera module and housing can be rotated on the base.

4. While observing the video from the camera, adjust the camera to point it at your surveillance target.

5. Position the housing to the LED array and the FOCUS and ZOOM adjusters (varifocal models) are accessible

6. Screw the bezel onto the base tight enough to hold the camera assembly securely in place.

7. If you are installing a CD601BVF / CD601WVF or CD700BVF / CD700WVF camera, use a small blade screwdriver to adjust the focus and zoom if necessary.

Infrared Turret Camera User Manual 15