advertisement
5.5 Function commands
(Not executable in stand-by mode. When the mute commands are sent while the splash screen is being displayed, the splash screen is only canceled.)
ITEM
BLANK
SPLIT
FREEZE
Function canceling
TEST PATTERN
Change of the initial value of
ASPECT
Character
MUTE
SPLT
Function
ASCII code
4Dh 55h 54h 45h
53h 50h 4Ch 54h
FRZ 46h 52h 5Ah
FNCOFF 46h 4Eh 43h 4Fh 46h 46h
TP 54h 50h
SCDEF 53h 43h 44h 45h 46h
0 (OFF), 1 (ON)
0 (OFF), 1 (ON)
0 (OFF), 1 (ON)
Data
0 (OFF), 1 (CROSS HATCH R),
2 (CROSS HATCH G), 3 (CROSS HATCH B),
4 (WHITE), 5 (BLACK), 6 (H. COLOR BARS),
7 (V. COLOR BARS)
0:NORMAL, 1:FULL
5.6 Menu setting commands
(Not executable in stand-by mode except some commands. Possible only to read during BLANK except some commands.)
The menu setting commands are used for the menu setting of this projector. If the personal computer sends the command without attaching the data code, the projector attaches to the received command its current setting value as the data code and send it back to the PC.
5.6.1 IMAGE menu
ITEM
COLOR ENHANCER
COLOR ENHANCER-
USER-GAMMA MODE
COLOR ENHANCER-
USER-BrilliantColor™
COLOR ENHANCER-
USER-DYNAMIC
CONTRAST
COLOR ENHANCER-
MULTI-SCREEN-
GAMMA MODE
COLOR ENHANCER-
MULTI-SCREEN-
BrilliantColor™
SUPER RESOLUTION
SUPER RESOLUTION-
LEVEL
CONTRAST
BRIGHTNESS
COLOR MATRIX
COLOR MATRIX -USER-
BASE
COLOR MATRIX -USER-
R/G/B
COLOR MATRIX -USER-
Y/C/M
COLOR MATRIX -USER-
SATURATION
COLOR MATRIX -USER-
RGB-TINT
COLOR TEMP.
COLOR TEMP.-USER-
CONTRAST
COLOR TEMP.-USER-
BRIGHTNESS
COLOR
TINT
SHARPNESS
Character
CE
CEU1GS
Function
ASCII code
Data
43h 45h 0 (AUTO), 1 (PRESENTATION), 2 (STANDARD),
3 (THEATER), 4 (sRGB), 5 (CLEAR BASE),
6 (BLUE BASE), 7 (USER), 8 (MULTI-SCREEN)
43h 45h 55h 31h 47h 53h 0 (DYNAMIC), 1 (NATURAL), 2 (DETAIL)
CEU1B
CEU1DC
CEU2GS
CEU2B
DHD
DHDLV
PP
43h 45h 55h 31h 42h
43h 45h 55h 31h 44h 43h
43h 45h 55h 32h 47h 53h
43h 45h 55h 32h 42h
44h 48h 44h
44h 48h 44h 4Ch 56h
50h 50h
51h 51h
CMT 43h 4Dh 54h
CMTBASE 43h 4Dh 54h 42h 41h 53h
45h
MRGB
MYCM
MSAT
MT
A
P
Q
T
S
R
4Dh 52h 47h 42h
4Dh 59h 43h 4Dh
4Dh 53h 41h 54h
4Dh 54h
41h
50h
51h
54h
53h
52h
00–10
0 (OFF), 1 (1), 2 (2), 3 (3)
0 (1.8), 1 (2.0), 2 (2.2)
00 to 10
0 (OFF), 1 (ON)
1 to 5
±30
±30
1 (COMPUTER), 2 (VIDEO), 3 (FLAT), 4 (USER)
1 (COMPUTER), 2 (VIDEO), 3 (FLAT)
± 30 ± 30 ± 30 (R+G+B)
± 30 ± 30 ± 30 (Y+C+M)
± 05
± 15
1 (STANDARD), 2 (HIGH), 3 (LOW), 4 (USER)
±30 ±30 ±30 (R, G, B)
±30 ±30 ±30 (R, G, B)
±10
±10
±05
12
advertisement
Related manuals
advertisement
Table of contents
- 2 1. Introduction
- 2 1.1 Connection
- 3 1.2 Interface
- 3 1.2.1 Pin assignment of SERIAL terminal (D-SUB 9-pin)
- 3 1.2.2 Communications format
- 4 2. Control command configuration
- 4 3. Control sequence
- 7 4. Execution procedure of RS-232C commands via LAN
- 8 5. Command list
- 8 5.1 General control commands
- 8 5.2 Reading commands
- 8 5.2.1 Status read commands
- 9 5.2.2 Read commands for items in INFORMATION menu
- 9 5.2.3 Read commands for other information
- 10 5.3 Remote control key commands
- 11 5.4 Direct commands
- 12 5.5 Function commands
- 12 5.6 Menu setting commands
- 12 5.6.1 IMAGE menu
- 13 5.6.2 INSTALLATION 1 menu
- 13 5.6.3 INSTALLATION 2 menu
- 14 5.6.4 MULTI-SCREEN menu
- 15 5.6.5 FEATURE menu
- 16 5.6.6 SIGNAL menu
- 16 5.6.7 NETWORK menu
- 19 5.7 Password lock commands