- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power supply units
- Eaton
- APR48
- User manual
advertisement
Eaton DC Power Solutions
The Eaton ® 3G Enterprise
Power Solutions are the ideal solution for converged data networks and low power telecommunications applications requiring compact, efficient and flexible DC power supplies.
This EPS2 series is a 19” rack mounted system and is available with up to two of the Eaton 3G
Enterprise or Access 48V rectifier modules providing a total output of up to 4000W.
Communication features of the
SC200 system controller include TCP/IP, SNMP and an onboard web server allowing access with standard web browsers. The SC200 also supports GSM cellular
(including text messaging) and standard PSTN modems.
The Enterprise systems include an integral DC distribution panel with easy to fit push-in circuit breakers and low voltage
The versatile SC200 system controller features a front access
USB port for ease of system setup along with a RS232 rear port and a 10BaseT Ethernet port for remote networking and communications. disconnect contactor to prevent over discharging of the optional backup batteries.
Typical applications include providing secure power for customer premises equipment, roadside cabinets, converged
VoIP/data networks, PoE, IP routers and small PABX’s.
19” rack mounting
High power density
Intelligent system controls
Pre-configured software
Onboard secure web server
Push-in easy to fit circuit breakers
Low voltage disconnect
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Easy to use menu & full color display
Optional batteries
Compatible with Eaton’s Energy Saver (ES) rectifier
Input
AC Supply Nominal: 120V, 240V
Operating Range: 90V – 275V
Power Factor † >0.99 (50 – 100% Output Current)
Efficiency † >96% peak
>95% (20% to 100% load, 230Vac)
Output
DC Output
Voltage Range
DC Output
Power
(maximum*) †
43 – 57.5V
240V AC:
120V AC: data sheets.
APR48-ES: 4.0kW
APR48-3G: 3.6kW
EPR48-3G: 1.8kW
APR48-ES: 2.3kW
APR48-3G: 2.2kW
EPR48-3G: 1.1kW
* Based on two rectifiers fitted, refer to rectifier
Environmental
Operating
Temperature
Range
Rated: -10°C to +50°C [-14°F to +122°F]
Extended*: -40°C to +70°C [-40°F to +158°F]
*Output current is derated above 50°C [122°F]
Mechanical
Dimensions
H,W,D
2U , 19” mounting, 14.1” [360mm]*
* Additional clear depth space is required for exhaust air.
System
System
Controller
DC Distribution
Module
Communication
Features
Rectifier Blank
Panels
SC200
12-way circuit breakers (2 x Battery, 10 x Load)
Circuit breaker type: Magnetic/Hydraulic, push fit
Battery circuit breakers: Heinemann AC1R Series
Typical ranges available: 30A, 40A, 50A, 60A, 70A
Load circuit Breakers: Heinemann JC1S Series
Typical ranges available: 6A,10A, 15A, 20A, 25A,
30A
USB direct
10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP,
Modbus-RTU and on board web server
RS232 to external PSTN or GSM modem (modem not included)
For unused rectifier positions
Software
DCTools Configuration software.
Free download from: www.powerware.com/downloads
Power Xpert Remote control and monitoring software
† Power factor, efficiency and DC output power are dependent on
rectifier model fitted. Refer to the rectifier data sheet for further details.
Options
Battery* Eaton Extended Battery Module (EBM)
5PX version - 5PXEBM48RT (available globally)
5130 version - 103006587-6591 (EMEA only)
Weight: 29.5kg [65lb]
Dimensions (H,W,D*): 85mm (2U), 432mm (19” mounting), 487mm
*Additional space is required at the rear for cables.
Typical Run time values* (see graph).
Battery Run Time (minutes)
Equipment Power (watts) )
= Required number of battery modules.
*Battery times are approximate and vary depending on factors such as: - load configuration
- battery charge
- battery age and temperature.
* Other battery options available - consult your local
Battery Cables or
Equipment
Cable
EBM Rack
Mounting Kit
Eaton agent.
CKBATT-02 Eaton EBM 5130 connection cable,
2000mm long
CKBATT-01 ‘other batteries’ connection cable,
2000mm long
Customer Equipment Connection Cable
CKLOAD-00 10-way connection loom, 1000mm long
Included with the EBM as standard
Certifications
All products comply with International Standards.
North America UL (Canada, USA), FCC Class B
Europe CE
Australia and New Zealand C-Tick
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.dcpower.eaton.com
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2012 Eaton Corporation All Rights
Reserved EPS2_F
Eaton DC Power Solutions
Eaton 5PX version pictured
The Eaton ® 3G Enterprise
Extended Battery Module
(EBM) is designed as an optional integrated backup power source to the 3G Enterprise Power
Systems, providing secure
The scalability of the EBM ensures that your investment is protected into the future as the demands of your network increase. Simply add more
EBM modules as your network power during AC grid failure for anything from orderly grows. shutdowns through to extended runtimes for continuity of service.
EBM has an 18Ahr capacity and is service maintenance free for the life of the battery module.
Battery function is monitored
Multiple battery modules can be connected together to achieve increased backup capacity for a given output demand. and controlled by the power system controller for complete battery protection.
This module is slim and rack mountable to suit the likely applications for these systems such as server room racks.
The battery modules use simple
‘plug and play’ cables for connecting the Enterprise Power
Solution. No specialized tools are required, thus making installation very easy in an IT environment.
Easy to install
Slimline 19” rack mounting
Extended runtime -18Ahr capacity
Modular and scalable
Service maintenance free VLRA batteries
Output
DC Output
Voltage
DC Output
Capacity
48V nominal
18Ahr
Maximum input/output current should not exceed
55Amps
Mechanical
Weight
Dimensions
H,W,D
29.5kg
85mm (2U), 432mm (19” mounting), 487mm*
* Additional space is required at the rear for cables.
Battery
Typical Run Time Values*
Battery Run Time
(minutes)
Equipment Power (watts) )
= Required number of battery modules.
*Battery times are approximate and vary depending on factors such as:
- load configuration
- battery charge
- battery age and temperature.
Order Number Eaton Extended Battery Module (EBM)
5PX version - 5PXEBM48RT (available globally)
5130 version - 103006587-6591 (EMEA only)
Certifications
All products comply with international standards. Contact your local
Eaton DC representative for details on the specific product versions available with these safety and EMC approvals:
North America UL listed
Europe CE
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2012 Eaton Corporation All Rights
Reserved EBM_D
Eaton DC Power Solutions
3G Access Power Solutions -
APS3-400 Series
Features
• Compact and scalable 19” sub-rack solution
• High power density (5.4kW @ 48V/3U, 19”)
• Easy plug-and-go rectifier set-up
• Fast on-line rectifier expansion (hot-plug)
• High efficiency and unity power factor
• Single AC input or individual rectifier feeds
• Intelligent system management features
• Remote access (TCP/IP, web browser, SNMP)
• Pre-configured software for quick & simple deployment
• Onboard energy management software optimizes operating efficiency for lower OPEX
The Eaton ® 3G Access Power
Solutions are ideal for low to medium power telecommunications applications requiring compact, efficient and flexible
DC power supplies with or without batteries.
This Eaton 3G Access Power
Solution 400 series has UL and
FCC standards certifications. A technician friendly user-interface includes a full color menu screen and is preconfigured for fast install and easy commissioning.
All system settings are fully adjustable in software and stored in transferable configuration files for repeatable one-step system set-up.
The advanced SC200 system controller offers high-level communications capability for real time information. It also has built-in intelligence for optimizing system efficiency, and comprehensive alarm and system status notifications, which are all designed to minimize operational expenses.
A comprehensive range of other controller features ensures maximum battery life and optimum system performance under a wide range of environmental conditions.
The 19” rack mount system is ideal for rapid deployment into customer facilities or enclosures.
With up to 6kW of power output, it features state-of-theart 48V 3G or Energy Saver (ES)
Access Power Rectifiers for superior operating efficiency
(>96%). The DC distribution panel, simple to use hydraulic magnetic circuit breakers, and optional low voltage disconnect
(LVD) modules are fully integrated.
Typical applications include standby power for customer premises equipment, outdoor power plants, data networks and
IP routers.
Technical Specification
Input
APR48-3G : 92% (50 – 100% Output Current)
APR48-ES : >96% peak,
90V – 275V*
* Output power derates below 175V AC.
Power Factor† >0.99 (50 – 100% Output Current)
Efficiency†
Operating Range:
Total Harmonic
Distortion
>95% (20% to 100% load, 230Vac)
<5% THD from 50% to 100% at load.
Output
DC Output
Voltage Range
DC Output
Power
(maximum)†
Mechanical
Dimensions
H,W,D
43 – 57.5V
APR48-3G : 120V AC: 3.3kW @ 48V
208-240V AC: 5.4kW @ 48V
APR48-ES : 120V AC: 3.45kW @ 48V
208-240V AC: 6kW @ 48V
Environmental
Temperature
Range
Rated:
Extended:
-10°C – +50°C [14°F – +122°F]
-40°C – +65°C [-40°F – 149°F]*
* Output current is derated above 50°C [122°F]
3U [5.25”, 133mm], 19” [483mm] mounting,
14” [356mm]*
* Additional clear space is required for exhaust air.
Rear access is required for cable terminations.
System
System
Controller
DC Distribution
Module
SC200 as standard.
SC100 optional.
10-way circuit breakers (2 x Battery, 8 x Load).
Load circuit breakers: Heinemann AMIR Series
5A,10A, 20A, 30A, 40A, 50A, 70A, 80A, 100A.
Battery circuit breakers: Heinemann AMIR 100A or
AMIP 120A.
Communication
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem not included)
*SC200 only
Battery disconnect: 200A internal. Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
For unused rectifier positions.
Batteries.
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet for more information.
Software
Free download from: www.powerware.com/downloads
Power Xpert Remote control and monitoring software
Certifications
All products comply with International Standards including UL (US and
Canada) and FCC (Class B) Verification.
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2010 Eaton Corporation
All Rights Reserved
APSX-400 E
Eaton DC Power Solutions
High power density (12kW @ 48V/6U, 19”)
Suitable for both 19” relay rack or enclosed cabinet
High efficiency and unity power factor
Easy fit plug-in hydraulic/magnetic circuit breakers.
20-way load and 6-way battery distributions
Single or dual low voltage disconnect (LVD) options
SC200 or SC100 intelligent system controller
Onboard energy management software optimizes operating efficiency for lower OPEX
Pre-configured software for quick & simple deployment
Remote access (TCP/IP, web browser, SNMP)
Easy plug-and-go rectifier set-up
Fast on-line rectifier expansion (hot-plug)
The Eaton ® 3G Access Power
Solutions are ideal for low to medium power telecommunications applications requiring compact, efficient and flexible
DC power supplies with or without batteries. Typical applications include standby DC power for customer premises equipment, outdoor power plants, data networks and IP routers.
The APS6-400 series has up to
12kW of power output, it features state-of-the-art 48 volt
3G Access Power Rectifiers, an integral DC distribution panel, easy to fit plug-in hydraulic magnetic circuit breakers, and optional low voltage disconnect
(LVD) modules for battery and non priority loads.
A technician friendly userinterface includes a full color menu screen and is preconfigured for fast install and easy commissioning.
The 19” rack mount system is ideal for rapid deployment into customer facilities or enclosures.
The advanced system controller offers high-level communications capability for real time information. It also has built-in intelligence for optimizing system efficiency, and comprehensive alarm and system status notifications, which are all designed to minimize operational expenses.
All system settings are fully adjustable in software and stored in transferable configuration files for repeatable one-step system set-up.
Other features include temperature compensated voltage output, automated equalize charging, and integrated battery testing, for maximum battery life under a wide range of environmental conditions.
Input
AC Supply† Nominal:
Operating Range:
120V, 208-240V
90V – 275V*
* Output power derates below 175V AC.
Power Factor† >0.99 (50 – 100% Output Current)
Efficiency† By system rectifier type:
APR48-ES: >95% (20 - 100% output current)
APR48-3G: 92% (50 - 100% output current)
Total Harmonic
Distortion
<5% THD from 50% to 100% at load.
Output
DC Output
Voltage Range
DC Output
Power
(maximum)
43 – 57.5V
Rectifier type: APR48-3G APR48-ES
110/120V AC:
208-240V AC:
6.6kW @ 48V 6.9kW @ 48V
10.8kW @ 48V 12kW @ 48V
Environmental
Temperature
Range Rated: -10°C to +45°C [14°F to +122°F]
Mechanical
Dimensions
H,W,D
6U [10.5”, 267mm], 19” [483mm] mounting,
15.3” [390mm]*
* Additional clear space is required for exhaust air.
Rear access is required for cable terminations.
System
System
Controller
DC Distribution
Module
SC200 as standard.
SC100 optional.
26-way circuit breakers (6 x Battery, 20 x Load).
Load circuit breakers: Heinemann AMIR Series
5A,10A, 20A, 30A, 40A, 50A, 70A, 80A, 100A, 120A
(2-pole).
Battery circuit breakers:
6 x Heinemann AMIR 80A, 100A
or 3 x Heinemann AMIP 120A, 150A, 200A.
Communication
Features of
SC200
USB direct.
10BaseT Ethernet, TCP/IP, SNMP, On board web server.
RS232 to external PSTN or GSM modem (modem
Low Voltage
Disconnect
(LVD) (Optional)
Rectifier Blank not included).
Battery disconnect: 400A internal.
Non priority load: 200A internal.
For unused rectifier positions.
Panels
Options Relay Rack
Batteries.
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet for more information.
Software
DCTools Configuration software.
Free download from: www.powerware.com/downloads
PowerManagerII Remote control and monitoring software
Certifications
North America: UL listed 1801, cUL, FCC
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2011 Eaton Corporation All Rights
Reserved APS6-400 D
Eaton DC Power Solutions
48Vdc systems up to 600A maximum load current.
24Vdc systems up to 500A maximum load current.
Eaton DV2-3G Metro Power
Solutions are ideal for low to medium power telecommunications applications requiring compact, efficient and flexible DC power. Typical applications include standby DC power for customer premises equipment, outdoor shelters,
VoIP, PABX, data networks and
IP routers.
The DV2-3G Metro series has up to 40kW of output for load and battery recharge. It features state-of-the-art Access 3G, or
Energy Saver rectifiers, an integral DC distribution panel with easy to fit plug-in hydraulic magnetic circuit breakers, and optional low voltage disconnects
(LVD) for battery and non priority loads. Each cabinet has fitted integrated battery shelves for up to 4 strings of 48V, or 8 strings of 24V, high capacity VRLA batteries. Optional battery cabinets for extended back-up time are also available.
A technician friendly userinterface includes a full color menu screen and is preconfigured for fast installation and easy commissioning.
System settings are fully adjustable in software and stored in transferable configuration files for repeatable one-step system set-up.
The advanced SC200 system controller offers high-level communications capability for real time information, including an Ethernet port for connecting directly to the Internet. It also has built-in intelligence for optimizing system efficiency, and comprehensive alarm and system status notifications, which are all designed to minimize operational expenses.
Other features include temperature compensated voltage output, automated equalize charging, and integrated battery testing, for maximum battery life under a wide range of environmental conditions.
High power density.
High efficiency and unity power factor.
Fast on-line expansion of rectifiers (hot-swap).
Integrated batteries.
Low voltage disconnects for battery and non priority loads.
Easy fit plug-in hydraulic/magnetic circuit breakers.
Flexible AC input.
Intelligent system management features.
Pre-configured software for quick & simple deployment.
Automatic battery condition testing.
Remote access (TCP/IP, web browser, SNMP).
Energy management software optimizes operating efficiency for lower OPEX.
All cabling top entry with optional rear cable duct extension for raised floor cable access.
Input
AC Supply
Voltage*
AC Input
Frequency
North America:
3P 208Vac nominal
2P 240Vac nominal
Global:
3P + N 230/400Vac nominal
1P + N 230Vac nominal
50/60 Hz
System
Rectifier
Module*
Nominal
Output
Voltage
Output
Voltage range
Max Number of Rectifiers
Maximum DC
Power †
Maximum
Load Current
APR24-3G APR48-3G APR48-ES
24Vdc
20–30Vdc
10
14.4kW
500A
48Vdc
40–58Vdc
20
36kW
600A
48Vdc
40–58Vdc
20
40kW
600A
Efficiency >91% >92% >96%
† Maximum DC power includes load and battery recharge.
Supervisory
Module
Communications
Batteries
SC200
10 baseT Ethernet port, web server, SNMP agent
Extension
Battery
Cabinets
Type: Front access VRLA
48V: Up to 600Ahr per cabinet using four strings of
150Ahr batteries.
24V: Up to 1200Ahr per cabinet using eight strings of
150Ahr batteries.
Up to six extension battery cabinets fitted with either four strings of 48V or eight strings of 24V in each cabinet
DC
Distribution
Load circuit
Breakers
Single Width
Circuit
Breakers
Dual Width
Circuit
Breakers
Triple Width
Circuit
Breakers
20-way total
Heinemann AMIR Series 5A, 10A, 20A,
30A, 40A, 50A, 70A, 80A, 100A
Heinemann AMIP 120A, 150A, 200A
Heinemann AMIP 250A
Battery Circuit
Breakers
Low Volt
Disconnect
Options
Heinemann AM1P, 200A integrated into battery shelf
1 x battery disconnect, 1 x 400A non-priority load (10 positions for non priority, 10 positions for priority).
Mechanical
Dimensions
H,W,D
With rear cable
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”] duct extension
H,W,D
Weight
2000mm [78.7”], 600mm [23.6”], 750mm [29.6”]
DV2-A20B-xxxx:
900kg [1980lb] typical maximum with 20 rectifier modules and 4 x 48V/150Ah battery strings.
Environmental
Operating
Temperature
Range
Humidity
Altitude
-25°C [-13°F] to 40°C [104°F]*
<95% non-condensing
<2000m (6500’). Thermally de-rates above this altitude, to a maximum altitude of 4000m
Certifications
All products comply with International Standards. Contact your local
Eaton Power Quality representative for details on the specific product versions available with these safety and EMC approvals:
North America: UL Listed 1801, cUL, FCC
*Refer to rectifier specifications for more information.
System capacity will vary depending on number of rectifiers and batteries selected.
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2011 Eaton Corporation. All Rights
Reserved. DV2-3G UL C
Eaton DC Power Solutions
DV2-3G Metro Power Solutions
Extension Battery Cabinet (UL Listed)
48Vdc : 4 strings
24Vdc : 8 strings
Eaton 3G Metro Power
Solutions are ideal for low to medium power telecommunications applications requiring compact, efficient and flexible DC power. Typical
The Extension Battery Cabinet can be fitted with an optional DC
Distribution, extending the number of output circuits available from the power cabinet. These distributions utilise easy fit, plug-in hydraulicmagnetic breakers applications include standby DC power for customer premises equipment, outdoor shelters,
VoIP, PABX, data networks and
IP routers.
The Extension Battery cabinet allows customers to easily
When connected back to a DV2-
3G Metro power cabinet, features include automatic temperature compensation,
Battery MCB alarm monitoring, automatic equalizing and fast charging, and automatic battery testing. configure and install additional battery back-up time for critical telecom and IT equipment. Up to six Extension Battery
Cabinets can be installed in addition to the DV2-3G Metro cabinet. This gives a total battery capacity of up to 4200Ahr in
48Vdc solutions, or 8400Ahr in
24Vdc solutions.
All cable entry is top access. An optional rear cable duct extension is available to allow cables to be run to the top of the cabinet in raised floor situations.
Features
• 24” x 24” cabinet
• 4 Battery Shelves
• Optional DC distribution with easy fit plug-in hydraulic/magnetic circuit breakers.
• UL Listed
Technical Specification
System Interconnections
Communications
Power
Screw terminals
Direct onto busbars
DC
Distribution
(Optional)*
Load Circuit
Breakers
Single Width
Circuit
Breakers
Heinemann AMIR Series 5A, 10A, 20A, 30A, 40A, 50A,
70A, 80A, 100A.
Dual Width
Circuit
Breakers
Triple Width
Heinemann AMIP 120A, 150A, 200A,
Heinemann AMIP 250A,
Circuit
Breakers
*Power is feed to the optional DC distribution from a load circuit in the
Power Cabinet. See power system documentation for more details.
Batteries*
Certifications (Pending)
All products comply with international standards. Contact your local Eaton DC representative for details on the specific product versions available with these safety and EMC approvals:
North America: UL Listed 1801, cUL, FCC
In the interests of continual product improvement all specifications are subject to change without notice.
48V Batteries Up to 600Ahr per cabinet using four strings of 150Ahr batteries.
24V Batteries: Up to 1200Ahr per cabinet using eight strings of
150Ahr batteries.
*Maximum of 6 battery cabinets added to the power cabinet per system
Mechanical
Dimensions
H, W, D
With rear cable duct extension
H,W,D
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
2000mm [78.7”], 600mm [23.6”], 750mm [29.6”]
Weight
Operating
Temperature
Range
DV2-EBC4-xxxx: 850kg [1870lb]. Typical maximum with 4 x 48V/150Ah battery strings.
-25°C [-13°F] to 40°C [104°F]
Altitude <2000m Thermally de-rates above this altitude, to a maximum altitude of 4000m
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2010 Eaton Corporation
All Rights Reserved
DV2-3G EBCUL A
Eaton DC Power Solutions
DV2 - 3G Core Power Solutions
North American Models
48V integrated systems up to 750kW
The Eaton ® Data-Voice-Video
Core Power Solutions range of
DC power systems are designed for telecommunications network applications requiring high powered, efficient and flexible
DC power supplies.
These DC power systems use
Eaton CR48-3G rectifier modules and include an integral AC and
DC distribution with flexible combinations of fuses and
MCBs, and an SC200 system controller. Low voltage disconnect (LVD) options are also available. DC distribution cabinets can be connected in parallel where additional distribution space is required.
Maximum rectifier capacity is
92.8kW, with additional cabinet(s) required for greater capacity. Systems up to 15,000A can be configured using external busbars.
charge, battery current limit, automatic equalize charging and automatic battery condition monitoring.
Typical applications are providing
48V standby power for centralized architecture such as local and central office switches and other large switch installations, wireless switching centers, long-distance transmission systems and data centers.
Eaton DV2 Core Power Solutions are pre-configured for fast installation and set-up. All system settings are fully adjustable in software and stored in transferable configuration files for repeatable one-step system set-up.
Typical Applications
• Wireless MSC sites
(CDMA/GSM/3G UMTS)
• Local and central office switching
Intelligent system management features include battery temperature compensation, fast
• Point of presence (POP) sites
• Data centers
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
Technical Specification
Input
Nominal AC
Supply
3P+PE, Δ 208Vac
3P+N+PE, Y 230/400Vac, 277/480Vac
50/60Hz
Power Factor >0.99* (20 – 100% Maximum System Current)
Efficiency up to 92%*
Output
DC Output
Voltage Range
Typical DC
Output Power
40 – 58V
46kW - 750kW †
Environmental
Operating
Temperature
Range
-25°C to +40°C
Mechanical
Dimensions
H,W,D
2200mm [86”], 600mm [23.6”], 600mm [23.6”]
Typical configuration with 16 CR48-3G rectifier modules.
System
System
Controller
SC200
* Refer to rectifier data sheet for full details
† Up to 92.8kW in a single cabinet
Options
AC Distribution Rectifier MCBs
DC Distribution
DCM2000 – bullet breakers up to 250A per circuit.
DCB1000 – high current circuit breakers up to
600A per circuit.
DCF0208 – 2U fuse panel, 2xTPL fuses up to
800A each.
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
DCF0408 – 4U fuse panel, 4xTPL fuses up to 800A each.
Single or dual LVD can be configured as battery or load disconnect including non-priority load disconnect.
For unused rectifier positions equipment
Software
Power Xpert Remote control and monitoring software www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions available with these safety and EMC approvals:
Australia /
New Zealand
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellWatch, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2011 Eaton Corporation
All Rights Reserved
DV2CoreNA C
Eaton DC Power Solutions
Matrix™ 2000 Standalone Inverter
Features
• Designed for telecom applications
• Pure sine wave output
• Unity power factor (full 2000 watt output power)
• Significant overload capability, 120% continuously, 200% for 5 seconds
• High efficiency, >91%
• High power density
• Built in Static Transfer Switch (STS)
• DSP design for improved reliability and performance
• Single phase 120Vac or 230Vac output options
• Comprehensive LCD/LED with keypad
• USB interface for connecting to PC
• Wide selection of configurable parameters.
• International certifications
The Eaton® Matrix™ 2000
Standalone Inverter is designed
The Matrix 2000 solution uses digital microprocessor control to for use in telecommunications applications where a very reliable AC supply is required.
The high efficiency and compact size makes the Matrix 2000
Inverter an outstanding solution for powering all types of critical
AC equipment. provide maximum performance under all operating conditions.
The built-in controller gives realtime system status through comprehensive LCD/LED displays, and allows program setting through a keypad panel.
The Matrix 2000 Standalone
Inverter provides 2000W of reliable AC power in a 1U x 19” rack mount package that includes a built-in Static Transfer
Switch (STS). The STS
The Matrix 2000 Standalone
Inverter includes a built in USB interface for monitoring and control. automatically and instantaneously switches the AC output, from the DC inverter to an alternative source such as AC mains (and back again), providing extra security of the AC supply to the load equipment.
Technical Specification
DC Input
Operating Range 48V: 40Vdc ~ 60Vdc
AC Input (to Transfer Switch)
Voltage Range: INV-4820SA: 89Vac to 138Vac
(50/60Hz) INV-4820ESA: 176Vac to 276Vac
Transfer Time <10ms
AC Output
Power Output 2000VA / 2000W
Wave Form Pure sine wave
Power Factor 1.0
Nominal Output
Voltage
(selectable)
Output
Frequency
Efficiency
Over Load
Protection
INV-4820SA: 110/115/120Vac
INV-4820ESA: 208/220/230/240Vac
50,60Hz
>91% at rated load
2*Inom, 5sec max
1.5*Inom, 10sec max
1.25*Inom, temperature controlled
Environmental
Requirements
Operating
Temperature
Range
-20°C to 60°C (-4°F to 140°F)
-20°C to 50 °C (-4°F to 122°F), full performance
Certifications
All products comply with international standards.
Safety
EN60950-1 / UL60950-1
Europe CE
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, Matrix, CellSure, SiteSure, DCTools and PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
MTX2000 B
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement