Changing the screen display. Sony DSC-T2G, DSC-T2

24

Changing the screen display

Touch [DISP] on the screen to change to the display selection screen.

• In index mode, you can set the number of images displayed.

• Settings other than [LCD Brightness] can be made separately for shooting and playback.

[Display Setup]

This sets if the icons are displayed on the screen.

Normal

Simple

DISP

Image Only

• [DISP] is displayed on the screen only when shooting.

• During playback, touch the right or left side of the screen to display the next/previous image, and press the center to display the guide.

Changing the screen display

[LCD Brightness]

This sets the LCD brightness.

• When viewing images in bright outside light if

[LCD Brightness] is set to [Normal], reset to

[Bright].

However, the battery power may decrease faster under such condition.

[Display Histogram]

This sets if a histogram is displayed on the screen.

A

• The histogram also appears when playing back a single image, but you cannot adjust the exposure.

• The histogram does not appear in the following situations:

While shooting

– When the menu is displayed.

– When recording movies

During playback

– When the menu is displayed.

– In index mode

– When you are using playback zoom.

– When you are rotating still images.

– During playback of movies

– When you are viewing by Album List.

– When you are viewing by Favorites list.

– When you are viewing by Sharemark list.

– When you are viewing by Calendar.

– When you are viewing by Scrapbook.

• A large difference in the histogram displayed during shooting and playback may occur when:

– The flash strobes.

– The shutter speed is slow or fast.

• The histogram may not appear for images recorded using other cameras.

Dark

B

Bright

A histogram is a graph showing the brightness of an image. The graph display indicates a bright image when skewed to the right side, and a dark image when skewed to the left side.

A Number of pixels

B Brightness

25