Channel List. Emerson LC320EM82, LC320EM81

5

O

PTIONAL SETTING

Channel List

The channel list function lets you remove undesired channels from the channel registration list.

1

Press [SETUP] to display the main menu.

2

Use [Cursor K / L] to select “CHANNEL”, then press

[ENTER].

5

Manual Register

The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting.

1

Press [SETUP] to display the main menu.

2

Use [Cursor K / L] to select “CHANNEL”, then press

[ENTER].

3

Use [Cursor K / L] to select “Channel List”, then press

[ENTER].

3

Use [Cursor K / L] to select “Manual Register”, then press [ENTER].

Autoscan

Channel List

Manual Register

Antenna

Autoscan

Channel List

Manual Register

Antenna

4

Use [Cursor K / L] to select the channel you want to remove, then press [ENTER].

4

Use [the Number buttons] to enter the number of the channel you want to add, then press [ENTER].

Highlight channels for

Ch Up/Down key selection.

27

11

For analog channels, select a channel to register using number keys.

For digital channels, you must perform Autoscan function.

Register

•

•

•

Ch Select

DTV

ENTER Watch/Skip

BACK

Back

67

The channel display for the removed channel darkens. You will not be able to select the channel again using [CH K / L].

To reactivate a removed channel, highlight it using

[Cursor K / L] and press [ENTER]. The channel display lightens.

When you remove a major channel, its minor channels are removed as well.

Note:

• The channel with the “DTV” indicated on the display is

ATSC. Otherwise the channel is NTSC.

5

Press [SETUP] to exit.

5

Press [SETUP] to exit.

Ch Change

BACK

Back

Note:

• If set up completes successfully, “Registered to the Channel

List” is displayed.

• If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

EN

21