WideSide® Sensitivity <i>(Advanced, with WideSide® transducer)</i>. Humminbird 777C2

531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 55 www.reelschematic.com

WideSide® Sensitivity

(Advanced: with WideSide® transducer)

WideSide® Sensitivity adjusts the sensitivity of the WideSide® beam. Increasing the sensitivity will display additional weak returns and decreasing the sensitivity will display fewer weak returns. A WideSide® transducer must be attached to the

Fishing System. The WideSide® Sensitivity menu choice is available when

Transducer Select is set to WideSide® (see Sonar Menu Tab: Transducer Select) and User Mode is set to Advanced (see Setup Menu Tab: User Mode).

NOTE: The WideSide® Sensitivity requires the purchase of the WideSide® transducer. You can visit our website at www.humminbird.com to order this accessory online or contact our

Customer Resource Center at 1-800-633-1468.

NOTE: WideSide® Sensitivity is particularly useful for adjusting the sensitivity of the

455 kHz sonar returns in the WideSide® View. The 455 kHz sensitivity can be adjusted without affecting the sensitivity of the other sonar frequencies.

To change the WideSide® Sensitivity setting:

1. Make sure you have selected WideSide® Transducer and Advanced

Mode and that the WideSide® transducer is connected, then highlight

WideSide® Sensitivity on the Sonar Main Menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the

WideSide® Sensitivity. (-10 to +10, Default = 0)

50