advertisement
![✧Digital ATSC DPTV Features. Philips 64PH9901 | Manualzz ✧Digital ATSC DPTV Features. Philips 64PH9901 | Manualzz](http://s1.manualzz.com/store/data/002086715_1-901999fe88b1fb7a33e4bb7d23ce5073-360x466.png)
M ONITOR F EATURES M ENU C ONTROLS
VGA/SVGA/HDCOMPONENT
A nother function of the DPTV is for the connection and use of
Personal Computers (PCs), and other High Definition (HD) digital source equipment, through the
DPTV’s Monitor inputs and display mode. Dedicated Audio
Input jacks (located on the rear of the DPTV) are also paired to the external source Monitor Video
Inputs (VGA and HD Component
Video In) for audio playback connections as well.
For example: To connect a Philips
DVX8000 Multimedia Home
Theater (MMHT) for monitor mode display use on the DPTV:
BEGIN
1 Connect a 15 pin VGA signal
cable (optional) from the VGA
(or SVGA) jack on the select auxiliary equipment (example:
DVX8000 MMHT) to the VGA
Input jack on the DPTV.
2 Connect the Left/Right
STEREO IN jacks on the DPTV to the (L/R) Audio Output jacks
(labeled Front) on the DVX8000
MMHT.
3 Press the “ext input” button
on the Pronto remote (or the
Source button on the DPTV’s local keyboard) to select the required
Monitor mode. (VGA, SVGA, and
EXT HD Monitor modes are available for selection with the
“ext input” or Source buttons.)
4 Use the DVX8000 MMHT as the video (and/or audio) playback source for material to be displayed on the DPTV.
STOP
S
MART
H
ELP
Note: The DPTV’s video display may temporarily appear misconverged during the initialization of certain VGA input connected PC programs (i.e., DOS). Once the PC program has completed its “bootup” phase, normal signal level processing will reoccur and the DPTV display will return to normal.
VGA
SVGA
SOURCE VOL M
VOL
DOWN
EXIT power alt audio sleep analog TV
1/4 Analog mute channel
TV status dtv freeze ext input
DTV volume
DTV
3
R L
REAR OF DPTV
2
SYSTEM AUDIO OUT
STEREO IN
C
RS LS SW
6 CHANNEL
AUDIO IN
1
Left/Right
Audio IN
VGA IN
75 ohm
HIGH
SYNC
H/H + V
V
R/Pr
G/Y
B/Pb
HD COMPONENT
VIDEO IN
FRONT
SPEAKERS
INTERNAL TV SPEAKERS
USED AS CENTER
CHANNEL
EXT INT
SUBWOOFER
PREAMP OUT
NO YES
SUBWOOFER
SPEAKER OUT
CENTER
CHANNEL INPUT
– + – +
50 W MAX IN
FRONT EXTERNAL SPEAKERS OUT
R
– +
SURROUND EXTERNAL SPEAKERS OUT
R
– +
All External Speakers 8 ohms Min.
FM
GND AM
ANTENNA
VIDEO
DSS LD VCR 2 IN-VCR-OUT TV
MONT
MULTI REMOTE
IN
OUT
AC-3 RF
L
R
CD IN-TAPE-OUT DSS LD VCR 2 IN-VCR-OUT MULTI
AC-3/
PCM
COAX
IN
AC-3/PCM
OPT
IN
ON
OFF
USB
1
HD COMPONENT VIDEO IN
• 6 CHANNEL AUDIO IN(put) jacks paired to
HD Component Monitor Video Inputs (shown below). For use with external accessory equipment capable of Dolby Digital 5.1 level audio output playback connections.
• SYNC(hronization) slide switch used to set the DPTV for digital HD Component signal input source impedance (low-75 ohm or High).
• H/H + V (for combined Horizontal/Vertical sync signals) or V(ertical) sync inputs control the display of a RBG sourced picture in the leftto-right dimension and from top-to-bottom.
• Separate Red/Green/Blue (Luminance-Y and
Color Difference-Pr/Pb) Component Video
Inputs provided for improved color bandwidth information and highest possible picture resolution for digital source connections. (See
BNC Connector information below.)
• BNC (Bayonet Connectors) are available to attach a computer to the DPTV for use as a monitor display. The optional BNC cables twist and secure to the individual
Red/Green/Blue and Horizontal/Vertical
Sync(hronization) component Video Inputs on the rear of the DPTV. This type connection ensures optimum video and color reproduction performance from a computer, or other external High Definition playback source.
2
L
AUDIO OUTPUT
SUB
WOOFER
R
FRONT SURROUND
CENTER
CENTER
REAR OF DVX8000 MMHT
R L
C
SYSTEM AUDIO OUT
STEREO IN
6 CHANNEL
AUDIO IN
RS LS SW
BRIGHTNESS
PICTURE
SHARPNESS
SVM
COLOR
OFF
TINT
VOLUME BAR ON
Note: The DPTV will display any Television compatible VGA or
SVGA (60Hz only) signal input.
15 PIN VGA
Connection Cable
TV
TV/CABLE
ANT
PHONE
RGB
SVGA
(RGB)
R DATA LINE
IR
MIC
LINE IN
VGA IN
75 ohm
HIGH
SYNC
H/H + V
V
R/Pr
G/Y
B/Pb
HD COMPONENT
VIDEO IN
FRONT
SPEAKERS
INTERNAL TV SPEAKERS
USED AS CENTER
CHANNEL
EXT INT
SUBWOOFER
PREAMP OUT
NO YES
SUBWOOFER
SPEAKER OUT
CENTER
CHANNEL INPUT
– + – +
50 W MAX IN
FRONT EXTERNAL SPEAKERS OUT
R
– +
SURROUND EXTERNAL SPEAKERS OUT
R
– +
All External Speakers 8 ohms Min.
41
BRIGHTNESS
PICTURE
SHARPNESS
SVM
COLOR
OFF
TINT
VOLUME BAR ON
M ONITOR F EATURES M ENU C ONTROLS
MONITOR MENU CONTROLS
T he Monitor Menu feature controls are to aid you in setting up the DPTV for the best in display image quality. Generally, the Monitor feature controls cover the basics in color and video image screen adjustments. A variety of Monitor Audio Input controls are also available for various speaker trim adjustments
(dependent upon whether the externally supplied Monitor input source is capable of 2-channel stereo or 6-channel digital sound replay).
BEGIN
1 Press the “ext input” button on the Pronto’s TV touchscreen, or
SOURCE on the local keyboard, to place the DPTV in the desired monitor display mode (VGA,
SVGA, EXTHD).
2 Press the MENU button to display the Monitor Feature
Control Menu.
3 Press the (M) Up/Down ▲▼
Arrows on the Pronto’s touchscreen display to highlight items within the Monitor control screen list.
4
Press the Left/Right § ©
Arrows on the Pronto to adjust the selected on-screen feature control.
5 Press the “exit” button to clear the screen when complete.
STOP
S
MART
H
ELP
Certain barscale Monitor
Feature Menu adjustments
(such as Brightness, Picture, etc.) will display separate control panel screens for individual settings.
Repress the Menu button (on the
Pronto remote or local keyboard) to return the DPTV to the Monitor
Menu when control adjustments are complete.
VGA
SVGA
BRIGHTNESS
PICTURE
SHARPNESS
COLOR
TINT
VOLUME BAR ON (OR OFF)
AUDIO INPUT 6 - CHANNEL (OR STEREO BACK) power alt audio sleep
1/4 analog TV
Analog
2
TV status dtv freeze ext input
DTV
DTV menu mute channel volume
1
TV
4
M
5 exit
4/4 Analog DTV
3
• Note: The list of Monitor Menu features (and their individual control settings) will change or readjust according to the capabilities of the selected Display Mode (VGA, SVGA, etc.)
• Also, due to on-going DPTV product design improvements such Monitor feature controls as BP (Back Porch) Clamp are soon to be automated for the sake of customer ease of use and operation. These features will operationally still be in place, but their functioning will be transparent to the end user and will no longer require any manual adjustments.
BASS
TREBLE
BALANCE
TRIM LEFT
TRIM RIGHT
TRIM CENTER
TRIM SUBWFR
TRIM SURR L
TRIM SURR R
INTERNAL AMP
DISPLAY MODE
DISPLAY FORMAT
INPUT TYPE
SYNC TYPE
HOR PHASE
BP WIDTH
ALIGN RED
ALIGN BLUE
ON
VGA
PC
RGB
AUTO
(OR OFF)
(OR SVGA/AUTO/HD)
(OR 16:9 FILL/NORMAL)
(OR YUV/RGB DIRECT)
(OR MODE 1-8)
• Use the Brightness and other
Monitor picture features (such as
Picture, Sharpness, etc.) to adjust overall DPTV screen intensity for optimum light/dark screen areas and shading details.
• Turn the Volume Bar control
ON to display the volume level settings for external audio sourced material on the DPTV screen.
• Select the Bass/Treble/Balance controls to adjust low/high frequency sound and speaker balance for external input audio source material played through the DPTV’s audio system.
• Use the Trim (Left, Right,
Center, Subwoofer, Surround
Left, Surround Right) controls when adjusting sound for a 6channel audio input received externally for playback through the DPTV’s Monitor display operating mode.
• Use the Display Mode, Format,
and Input controls to set the
DPTV for the type of external monitor input source (VGA,
SVGA, EXT HD); the DPTV’s display screen format used (PC,
Auto, 16:9); and RGB type signal received.
• Additional Sync Type,
Horizontal Phase, Back Porch
(Clamp & Width), and
Alignment (Red & Blue) controls can be used to adjust for color shifts, black level, and various other display screen imagery.
42
advertisement
Related manuals
advertisement
Table of contents
- 3 Welcome/Product Registration
- 4 Safety/Precautions
- 5 Table of Contents
- 6 Features, Model and Cabinet Information
- 7 Channels and other Control Features
- 8 Tint, and Picture Controls
- 9 ✧Using the Clearview Control
- 10 ✧Adjusting the DPTV's Convergence Control
- 11 ✧Setting the Smart Picture Controls
- 13 ✧Setting the DPTV for Closed Captioning
- 16 ✧Adding Channels in Memory (Manually)
- 17 ✧Setting the DPTV Clock
- 18 ✧Adjusting the Channel Display Control
- 19 ✧Using the Channel Label Control
- 20 Controls
- 21 ✧Setting the DPTV for Stereo/SAP Programs
- 22 ✧Using the Volume Display Control
- 24 ✧Analog NTSC DPTV Features
- 25 ✧Auxiliary 1/2/3 Audio/Video Inputs
- 27 ✧S-Video Input
- 28 ✧Audio/Video Outputs
- 29 ✧System Audio Output Connections
- 30 (over-the-air) Broadcast Channels
- 31 Tint, and Picture Controls
- 32 ✧Adjusting DTV Convergence
- 33 ✧Surround Sound Speaker Connections
- 34 System Use and Connections
- 36 ✧Adjusting Bass and Treble Sound Controls
- 36 ✧Using the Auto Volume Control
- 38 ✧Using the Test Tone Audio Signal Control
- 40 ✧Adding Channels in Memory (Manually)
- 41 ✧Digital ATSC DPTV Features
- 43 (for VGA/SVGA/EXT HD devices)
- 44 Tips if Something Isn’t Working
- 44 Cleaning and Care
- 45 Index
- 45 Regulatory Notices
- 46 Glossary of DPTV Terms
- 47 Factory Service Locations