180
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them as a new file.
Only RAW images captured with this camera can be edited. RAW images and
JPEG images captured with other cameras cannot be edited on this camera.
7
Developing One RAW Image
1
Select a RAW image in Playback mode, and press the four-
way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23) to select [Developing a Single
Image], and press the 4 button.
The parameters recorded in the image file appear.
Proceed to Step 7 if you do not need to change the parameters.
4
Use the four-way controller (23) to choose a parameter you want to change.
MENU
You can select a different image by turning the e-dial.
MENU
OK
OK
The following parameters can be changed.
Parameter
Aspect Ratio
Recorded Pixels
Quality Level
Color Space
Custom Image
White Balance
Value
K /J/I/L
JPEG recorded pixels corresponding to the aspect ratio
C /D/E sRGB/AdobeRGB
Bright/Natural/Portrait/Landscape/Vibrant/
Radiant/Muted/Bleach Bypass/Reversal
Film/Monochrome/Cross Processing
F /G/H/^/JD/JN/JW/JL/I/
L /f/K
Sensitivity
High-ISO NR
Shadow Correction
-2.0 to +2.0
Auto/Low/High
Auto/On/Off
Distortion Correction On/Off
p.131
p.124
—
p.85
p.129
p.149
Page
p.121
p.122
p.123
p.123
5
Use the four-way controller (45) to change the value.
Press the four-way controller (5) to display the setting screen for White
Balance and Custom Image.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller (23) to select [Continue] or
[Exit], and press the 4 button.
Select [Continue] to edit other images. The screen for selecting the parameter in Step 5 appears again.
181
7
182
7
Developing Multiple RAW Images
You can develop multiple RAW images with the same settings.
1
Select [Developing Multiple Images] in Step 3 on p.180,
and press the 4 button.
The multi-image display screen appears.
Refer to p.156 for details on operations in the multi-image display screen.
2
Use the four-way controller (2345) to select the RAW
images to be developed, and press the 4 button.
3
Press the mc button.
The development confirmation screen appears.
4
Use the four-way controller (23) to select [Develop images as shot] or [Develop images with modified
settings], and press the 4 button.
To change parameters, select [Develop images with modified settings].
5
Use the four-way controller
(2345) to set [JPEG Recorded
Pixels] and [JPEG Quality].
MENU OK
When [Develop images with modified settings] is selected in Step 4, refer to
p.181 to change other parameters.
MENU OK
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The selected RAW images are developed and saved as new images.
8
Changing Additional
Settings
This chapter describes how to change additional settings.
How to Operate the Set-up Menu ...................... 184
Camera Settings.................................................. 186
File Management Settings.................................. 198
