PLAYABLE DISCS. Symphonic WF802

ABOUT THE DISCS

PLAYABLE DISCS

The following discs can be played back on this

DVD/VCR.

Disc Type

DVD

Video

Audio

CD

Logo Contents

Sound and

Pictures

Sound

Disc Size

12 cm

8 cm

Maximum

Playback Time

Approx. 4 h

(single-sided)

Approx. 8 h

(double-sided)

Approx. 80 min

(single-sided)

Approx. 160 min

(double-sided)

12 cm 74 min

8 cm

(singles)

20 min

DISC TYPES

[DVD]

Data on a DVD is divided into sections called "titles", and then into subsections called "chapters", each of which is given a title or chapter number. Playback conditions are preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If a function you selected does not run as desired, refer to the manual accompanying the disc.

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2

This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as

PAL or SECAM.

¡ Some discs include region codes as shown below.

[AUDIO CD]

Data on an audio CD is divided into sections called

“tracks”, each of which is given a track number.

¡ The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be played back on DVD/VCR with the same region code.

The following discs cannot be played back on this

DVD/VCR.

¡ DVD with region codes other than 1 or ALL.

¡ DVD-ROM

¡ DVD-RAM (Never attempt to play back, otherwise a malfunction may result.)

¡ CD-ROM

¡ VSD

¡ CDV (Only plays back the audio part.)

¡ CD-G (Only plays back the sound.)

¡ CD-R/CD-RW

(Only plays back discs on which audio CD or

MP3 are recorded.)

¡ CD-I

(Never attempt to play back, otherwise a malfunction may result.)

¡ SACD

¡ Photo CD

(Never attempt to play back, otherwise a malfunction may result.)

¡ Video CD

(Never attempt to play back, otherwise a malfunction may result.)

Any other discs without compatibility indications

Example

Track 1

Example

Track 2 Track 3

Album 1

Track 1 Track 2 Track 3

Track 4

[MP3]

Data on an MP3 is divided into sections called "albums", and then into subsections called "tracks", each of which is given an album or track number.

Track 4

Track 5 Track 6

Album 2

Track 1 Track 2

– 8 – EN

1L25

OPERATING CONTROLS AND FUNCTIONS

FRONT PANEL

1 2 3 4 5 6 7 8 9

POWER

OPEN/CLOSE

DVD OPERATION

STOP SKIP/REV PLAY FWD/SKIP

OUTPUT

VCR OPERATION

STOP/EJECT REW PLAY F.FWD

REC/OTR

CHANNEL

TIMER

SET

VCR/TV

CST.IN

VIDEO

L

AUDIO

R

REMOTE CONTROL

26

25

27 56

POWER SPEED AUDIO

28

1 2 3

55

SKIP/CH.

4 5 6

29

VCR/TV

31

30

32

7

DISPLAY

8

0

DVD

PLAY

9

+100

+ 10

VCR

SLOW

PAUSE

54

53

52

51

50

49

STOP

33

RECORD

34

35

36

37

38

39

MENU

SETUP TITLE

ENTER

RETURN

47

48

46

41

40

MODE ZOOM

SEARCH

MODE

SUBTITLE ANGLE REPEAT

CLEAR/

C.RESET

A-B

45

43

44

42

1.

Disc loading tray

2.

DVD OUTPUT Light (Green) [page 13]

This light appears when the DVD output mode is selected. You can only watch DVDs when the green

DVD OUTPUT Light is on. To make the green DVD

OUTPUT light come on, press the DVD button on the remote control or the OUTPUT button on the front panel.

3.

VCR OUTPUT Light (Green) [page 13]

This light appears when the VCR output mode is selected. You can only watch tapes when the green

VCR OUTPUT light is on. To make the green VCR

OUTPUT light come on, the VCR button on the remote control or the OUTPUT button on the front panel.

4.

CASSETTE COMPARTMENT

5.

REC/OTR Light [page 20]

Lights up during recording.

6.

TIMER SET Light [page 20]

This light glows when the DVD/VCR is in standby mode or off for a timer recording or during a One-

Touch Recording. It flashes if the TIMER SET button is pressed for a timer recording, but there is no

24

23

22

21

20

19

18

17

16

15 13

14 12

11

10 tape in the DVD/VCR. It flashes when all timer recordings or One-Touch Recordings are finished.

7.

POWER Button [page 17]

Press to turn the power on and off.

8.

POWER Light

Lights up when the power is on.

9.

VIDEO In Jack

Connect a video cable coming from the video out jack of a camcorder, another VCR, or a video source

(laser disc player, camcorder, etc.) here.

10.

AUDIO In Jacks

Connect audio cables coming from the audio out jacks of a camcorder, another VCR, or an audio source here.

11.

TIMER SET Button [page 21]

Press to put the DVD/VCR into standby mode for a timer recording.

12.

CST IN Light [page 19]

Lights up when a cassette is in the DVD/VCR.

13.

VCR/TV Light [page 17]

Lights up when the DVD/VCR is in the VCR position, and goes off when it is in the TV position.

14.

CHANNEL Buttons [page 17]

In VCR mode, press to change TV channels on the

DVD/VCR; press to adjust the tracking during normal or slow motion playback; press to remove vertical jitter in a Still picture.

15.

REC/OTR Button (VCR) [page 20]

Press once to start a recording. Press repeatedly to start a One-Touch Recording.

16.

F.FWD Button (VCR) [page 17]

Press to rapidly advance the tape, or view the picture rapidly in forward during playback. (Forward

Search). When setting program (For example:setting clock or timer program), press to determine your selection and proceed to the next step you want to input. Press to determine the setting modes from the on screen menu. Press to add or delete channel numbers during channel preset.

17.

PLAY Button (VCR) [page 17]

Press to begin playback. Press to enter digits when setting program (For example: setting clock or timer program). Press to select the setting modes from the on screen menu.

18.

REW Button (VCR) [page 18]

Press to rewind the tape, or to view the picture rapidly in reverse during the playback mode (Rewind

Search). Press to cancel a setting of timer program.

Press to correct digits when setting program (For

– 9 – EN

1L25

example: setting clock or timer program). Press to add or delete channel numbers during channel preset.

19.

STOP/EJECT Button (VCR) [page 21]

●

EJECT Button

Press to remove the tape from the VCR.

●

STOP Button

Press to stop the tape motion. Press to enter digits when setting program (For example:setting clock or timer program). Press to select the setting modes from the on screen menu.

20.

OUTPUT Button [page 13]

Press to select DVD mode or VCR mode.

●

You can switch the output mode either by pressing the OUTPUT button on the front panel, or by pressing the DVD or the VCR button on the remote control. However, if you press the OUTPUT button on the front panel first, you need to re-select the corresponding mode by pressing the DVD or the

VCR button on the remote control.

21.

FWD/SKIP Button (DVD) [page 25]

Plays back from the beginning of the next chapter or track. Hold down to fast forward playback.

22.

PLAY Button (DVD) [page 23]

Press to begin playback.

23.

SKIP/REV Button (DVD) [page 25]

Plays back from the beginning of the current chapter or track. Hold down to fast reverse playback.

24.

STOP Button (DVD) [page 23]

Stops operation of the disc.

25.

OPEN/CLOSE Button [page 23]

Press to insert discs into or remove them from the tray.

26.

Display, Remote Sensor Window

27.

SPEED Button [page 20]

Press to select the VCR’s recording speed (SP or SLP)

28.

POWER Button

Press to turn the power on and off.

29.

Number Buttons

●

DVD mode [page 25]

Press to directly select a Track (Audio CD) for playback.

Press to program Tracks (Audio CD) for playback.

●

VCR mode [page 17]

Press to select TV channels on the DVD/VCR.

To select channels, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0 then 6.

+100 Button:

If you want to select channels 100 and above, press this button first, then press the last two digits. For example, to select channel 125, press +100 button first, then press 2 and 5.

30.

DISPLAY Button

● DVD mode [page 29]

Press to access or remove the display screen during

DVD or Audio CD playback.

● VCR mode [page 22]

Press to access or remove the VCR’s on-screen status display.

31.

DVD Button [page 13]

Press to select DVD mode for the remote control.

● You can switch the OUTPUT mode either by pressing the OUTPUT button on the front panel, or by pressing the DVD or the VCR button on the remote control. However, if you press the OUTPUT button on the front panel first, you need to reselect the corresponding mode by pressing the

DVD or the VCR button on the remote control.

32. h Button

●

DVD mode

Press to view the DVD picture in fast reverse motion or to reverse playback of an Audio CD.

●

VCR mode

Press to rewind the tape, or to view the picture rapidly in reverse during the playback mode

(Rewind Search). Press to cancel a setting of timer program. Press to correct digits when setting program (For example: setting clock or timer program). Press to add or delete channel numbers during channel preset.

33.

STOP Button

●

DVD mode

Press to stop the disc motion.

●

VCR mode

Press to stop the tape motion. Press to enter digits when setting program (For example: setting clock or timer program). Press to select the setting modes from the on screen menu.

34.

RECORD Button

Press to start a recording.

35.

MENU Button

●

DVD mode [page 23]

Press to display the menu of the Disc.

●

VCR mode [page 17]

Press to access the VCR menu.

36.

TITLE Button [page 24]

37.

SETUP Button [page 34]

Press to enter the setup mode.

38.

ZOOM Button [page 28]

Enlarges part of a DVD-reproduced image.

39.

MODE Button [pages 19]

Activates program playback or random playback mode when playing CDs or MP3. Sets Black level.

40.

SUBTITLE Button [page 32]

Press to select the desired subtitle language.

41.

ANGLE Button [page 32]

Press to change the camera angle to see the sequence being played back from a different angle.

42.

REPEAT Button [page 27]

Repeats playback of the current disc, title, chapter or track.

43.

A-B REPEAT Button [page 27]

Repeats playback of a selected section.

44.

SEARCH MODE Button

●

DVD mode [page 25]

Press to access or remove the Search display, which allows you to go directly to a specific

Title/Chapter/Track/Time.

●

VCR mode [page 19]

Press to perform a Time Search or an Index Search.

45.

CLEAR/C.RESET Button

●

DVD mode [page 26]

Press to reset the setting.

●

VCR mode [page 18]

Press to reset the counter. Press to exit from the

MENU screen.

46.

RETURN Button

Returns to the previous operation.

47.

Arrow Buttons

Use when making settings while watching the display on a TV screen.

48.

ENTER Button

– 10 – EN

1L25

Press to accept a setting.

49. g Button

●

DVD mode

Press to fast forward the Disc. Press the Pause button, then press the FWD button to begin slow motion playback. Press the FWD button repeatedly to change the forward speed of slow motion.

●

VCR mode

Press to rapidly advance the tape, or view the picture rapidly in forward during playback (Forward

Search). When setting program (For example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input. Press to determine the setting modes from the on screen menu. Press to add or delete channel numbers during channel preset.

50.

PLAY Button

●

DVD mode

Press to begin playback.

●

VCR mode

Press to begin playback. Press to enter digits when setting program (For example: setting clock or timer program). Press to select the setting modes from the on screen menu.

51.

VCR Button [page 13]

Press to select VCR mode for the remote control.

●

You can switch the OUTPUT mode either by pressing the OUTPUT button on the front panel, or by pressing the DVD or the VCR button on the remote control. However, if you press the OUTPUT button on the front panel first, you need to reselect the corresponding mode by pressing the

DVD or the VCR button on the remote control.

52.

PAUSE Button

●

DVD mode [page 24]

Press to pause Disc playback. Press repeatedly to advance the DVD picture step by step (or one frame at a time).

●

VCR mode [page 19]

While recording, press to temporarily stop the recording (pause). Press a second time to resume normal recording. You can not pause a One-Touch

Recording. Or, press during tape playback to freeze the picture. Press to advance the picture one frame at a time during still mode.

53.

SLOW Button [page 19]

During tape playback, press to view the video tape in slow motion. Press again to resume normal playback.

This button does not affect DVD playback.

54.

VCR/TV Button [page 21]

Use to select VCR or TV position. If the VCR/TV light appears on the front of the DVD/VCR, it is in

VCR position (in either VCR or DVD mode). If the

VCR/TV light doesn’t appear on the front of the

DVD/VCR, it is in TV position.

●

VCR Position

When the green VCR OUTPUT light appears on the front of the DVD/VCR, use the VCR to watch a tape, watch a TV program while recording it, or watch a

TV broadcast using the CHANNEL or the Number buttons to change channels at the DVD/VCR.

When the green DVD OUTPUT light appears on the front of the DVD/VCR, use the DVD/VCR to view Disc playback or menus.

●

TV Position

Use to watch TV (changing channels at the TV) or watch one program while recording another.

55.

SKIP/CH. Buttons

●

DVD mode

Press to skip Chapters or Tracks.

●

VCR mode

Press to change TV channels on the DVD/VCR.

56.

AUDIO Button [page 31]

57.

Press to select a desired audio language or sound mode.

AC Power Cord

Notes

¡ To use the remote control to operate the DVD/VCR and its features, press the DVD button on the remote control before pressing other DVD buttons. Verify that the green DVD OUTPUT Light is on.

¡ To use the remote control to operate the VCR and its features, press the VCR button on the remote control before pressing other VCR buttons. Verify that the green VCR OUTPUT Light is on.

REAR VIEW

57 58 59

ANT - IN

ANT - OUT

CH3 CH4

L

AUDO

R

IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

L

VIDEO R

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

COAXIAL

6665 64 63 62 61 60

58.

Connect to a standard AC outlet to supply power to the DVD/VCR.

AUDIO IN Jacks

59.

Connect audio cables coming from the audio out jacks of a camcorder, another VCR, or an audio source here.

DVD/VCR AUDIO OUT Jacks

– 11 – EN

1L25