advertisement
Tape Operation/Recording
Maintenance
Cleaning the Cabinet
●
Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
●
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the centre out.
●
Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records.
Cleaning the disc lens
●
After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Cleaning the Heads and the Tape Paths
●
To ensure good recording and playback quality, clean the heads
A
, the capstan(s)
B
, and pressure roller(s)
C
after every 50 hours of tape operation.
●
Use a cotton swab slightly moistened with cleaning fluid or alcohol.
●
You can also clean the heads by playing a cleaning tape once.
C B A B C
Demagnetising the heads
●
Use a demagnetising tape available at your dealer.
24 pg001-033_FWM377_55_Eng 24 2007.1.23, 17:06
advertisement
Related manuals
advertisement
Table of contents
- 7 Supplied accessories
- 7 Environmental information
- 7 Safety information
- 8 Hearing Safety
- 9 Rear connections
- 10 Optional connection
- 11 control
- 14 Plug and Play
- 15 Demonstration mode
- 15 Switching the system to standby mode
- 15 Power-saving automatic standby
- 15 Dim mode
- 15 Volume control
- 16 Sound control
- 16 Karaoke
- 17 Discs for playback
- 17 About MP3/WMA disc
- 17 Loading discs
- 18 Playing discs
- 18 Replacing discs during playback
- 18 Selecting a desired track/passage
- 18 (MP3/WMA disc only)
- 19 Programming the disc tracks
- 19 Erasing the programme
- 20 Tuning to radio stations
- 21 Storing preset radio stations
- 21 Tuning to preset radio stations
- 22 Tape playback
- 23 General information on recording
- 23 Preparation for recording
- 23 One touch recording
- 23 CD/USB Synchronised start recording
- 24 Maintenance
- 25 Using a non-USB device
- 25 Using a USB mass storage device
- 27 Ripping function
- 28 Tuner record timer setting
- 29 Clock setting
- 29 Timer setting
- 30 Sleep timer setting