Rewinding/Fast forwarding. Philips FWM35/30, FWM35/21M, FWM35

Tape Operation/Recording

Rewinding / Fast forwarding

1

Stop playback, press à or á.

➜ The tape will stop automatically at the end of rewinding or fast forwarding.

2

Press Ç to stop rewinding or fast forwarding.

Note:

– During rewinding or fast forwarding of a tape, it is also possible to select another source (CD or

TUNER, for example).

General information on recording

● For recording, use only tape of IEC type I

(normal tape).

● The recording level is set automatically, regardless of the position of the Volume, DBB,

DSC and so forth.

● The tape is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds.

● To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.

● If “

CHECK TAPE” is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening.

IMPORTANT!

– Recording is permissible if copyright or other rights of third parties are not infringed upon.

– Recording is possible only on tape deck 2.

Preparation for recording

1

Press TAPE to select TAPE 2.

2

Load a recordable tape into tape deck 2 with full spool to the left.

3

Prepare the source to be recorded.

CD – load the disc(s).

TUNER – tune to the desired radio station.

TAPE – load the prerecorded tape into tape deck 1 with the full spool to the left.

AUX – connect external equipment.

When recording is in progress

➜

REC starts flashing.

● It is not possible to listen to another source, except tape dubbing.

● It is not possible to activate the timer function during recording or tape dubbing.

One touch recording

1

Press CD, TUNER or AUX to select the source.

2

Start playback of the selected source.

3

Press RECORD to start recording.

To stop recording

● Press Ç on the system.

Note:

– One Touch Recording is not possible in TAPE mode, "

SELECT SOURCE" is displayed.

21