Different play modes: Shuffle and Repeat. Philips MC108B Micro Hi-Fi System, MC108B, MC108B/79

CD Operation

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during playback.

REPEAT ............ plays the current track continuously

REPEAT ALL ... repeats the entire disc/ programme

SHUFFLE ......... tracks of the entire disc are played in random order

1

To select your play mode, press SHUFF or

REPEAT on the remote control before or during playback until the display shows the desired function.

2

Press

2; to start playback if in the STOP position.

➜ If you have selected SHUFFLE, playback starts automatically.

3

To return to normal playback, press SHUFF or

REPEAT on the remote control until the various SHUFFLE/ REPEAT modes are no longer displayed.

● You can also press STOP 9 to cancel your play mode.

Programming track numbers

Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to

20 tracks can be stored in the memory.

1

Press

¡1 or 2™ to select your desired track number.

2

Press PROG.

➜ Display shows: the selected track number.

PROG

flashes and appears briefly.

3

Repeat steps 1-2 to select and store all desired tracks.

➜ is displayed if you attempt to programme more than 20 tracks.

4

To start playback of your disc programme, press

2;.

Notes:

– If you wish, you can add further tracks to your current program. Make sure you are in the STOP position, and that you have not exceeded 20 tracks.

– Display shows selected.

if there is no track

Erasing the programme

You can erase the programme by:

● pressing 9 once in the STOP mode;

● pressing 9 twice during playback;

● opening the CD compartment;

● Select another sound source

➜

PROG

disappears from the display.

MC108B_79_Eng 11 14/2/07, 11:33

11 xxxxx