Safety notes . Fujitsu CELSIUS M4 Series, CELSIUS R6 Series, CELSIUS R5 Series, CELSIUS M5 Series, CELSIUS M6 Series, CELSIUS R670, CELSIUS R670-2, CELSIUS R570-2, CELSIUS M470-2, CELSIUS M470

Important notes

In this chapter you will find information regarding safety which it is essential to take note of when working with your device.

Safety notes

!

Pay attention to the information provided in the "Safety" manual and in the following safety notes.

During installation and before operating the device, please observe the instructions on environmental conditions in the "Technical data" chapter as well as the instructions in the

"Preparing for use" chapter.

The ON/OFF switch does not disconnect the device from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the power socket.

The lithium battery on the mainboard should only be replaced in accordance with the

instructions in the "Extensions to the mainboard" - "Changing lithium battery" chapter.

Caution, components in the system can get very hot.

Transporting the device

!

Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site. Do not unpack them until all transportation manoeuvres are completed.

Cleaning the device

!

Turn off all power and equipment switches and disconnect the power plug from the mains outlet.

Do not clean any interior parts yourself, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic.

Ensure that no liquid enters the system.

Wipe the casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and the mouse.

A26361-K994-Z220-1-7619, Edition 2 3