3.5 Replacing the Slim DVD-ROM. Tyan Transport TA26 (B2932), Transport TA26 B2932
Add to my manuals
81 Pages
advertisement
▼
Scroll to page 2
of 81
3.5
Replacing the Slim DVD-ROM
Follow these instructions to replace the DVD-ROM.
1. Remove the FFC cable from the rear of the DVD-ROM drive.
2. Press the tab in the direction shown to release the DVD-
ROM drive.
3. Push the DVD-ROM drive through the front of the TA26
B2932.
Chapter 3: Replacing Pre-Installed Components 41
4. Remove the two screws that secure DVD-ROM drive to the backplane.
5. Replace the DVD-ROM drive.
6. Secure the DVD-ROM to the backplane using two screws. Then replace the unit into the drive bay and connect the DVD-ROM FFC cable.
42 Chapter 3: Replacing Pre-Installed Components
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 1.1 About the TYAN Transport TA26 B
- 9 1.2 Product Models
- 10 1.3 Features
- 12 1.4 Unpacking
- 12 1.4.1 Box Contents
- 13 1.4.2 Accessories
- 15 1.5 About the Product
- 15 1.5.1 System Front View
- 15 1.5.2 System Rear View
- 16 1.5.3 LED Definitions
- 17 1.5.4 Motherboard Layout
- 18 1.5.5 Jumpers & Connectors
- 19 1.5.6 System Block Diagram
- 20 1.5.7 Internal View
- 21 2.0.1 Before You Begin
- 21 2.0.2 Work Area
- 21 2.0.3 Tools
- 22 2.0.4 Precautions
- 23 2.1 Installing Motherboard Components
- 23 2.1.1 Removing the Chassis Cover
- 24 2.1.2 Installing the CPU
- 27 2.1.3 Installing the Memory
- 30 2.1.4 Installing PCI-E Cards
- 32 2.1.5 Installing Hard Drives
- 34 2.1.6 Installing a Floppy Drive
- 37 2.2 Rack Mounting
- 37 2.2.1 Installing the Server in a Rack
- 43 3.1 Introduction
- 43 3.1.1 Work Area
- 43 3.1.2 Tools
- 44 3.1.3 Precautions
- 45 3.2 Disassembly Flowchart
- 46 3.3 Removing the Cover
- 47 3.4 Replacing Motherboard Components
- 47 3.4.1 Disconnecting All Motherboard Cables
- 48 3.4.2 Removing the Motherboard
- 49 3.5 Replacing the Slim DVD-ROM
- 51 3.6 Replacing the LED Control Board
- 53 3.6.1 LED Control Board Features
- 53 3.6.2 LED Control Board Connector Pin Definitions
- 54 3.7 Replacing the Backplane
- 56 3.7.1 M1220 SAS/SATA Backplane Features
- 58 3.7.2 M1220 SAS/SATA Backplane Connector Pin Definitions
- 62 3.8 Replacing the System Fan
- 63 3.9 Replacing the Power Supply
- 63 3.9.1 Standard Power Supply
- 65 3.9.2 Optional 1+1 Redundant Power Supply