Preference Setup. Philips BDP2500/98, BDP2500

[PCM Downsampling]

Set the sampling rate for PCM audio output from the DIGITAL OUT jack

(coaxial/optical).

• [On] - PCM audio is down-sampled at 48kHz.

• [Off] - For BD or DVD recorded in LPCM without copyright protection, two-channel audio signals up to 96 kHz are output as

LPCM signals with no conversion.

Preference Setup

1 Press .

2 Select

3 Select

•

•

Change Password

Video Setup

Audio Setup

Preference Setup

EasyLink Setup

Advanced Setup

Menu Language

Parental Control

Screen Saver

Display Panel

Auto Standby

VCD PBC

4 Select an option, then press OK.

5 Select a setting, then press OK.

English

Off

Off

Normal

On

On

To return to the previous menu, press

To exit the menu, press .

[Menu Language]

Select an on-screen menu language.

BACK.

Note

• If this product is connected to an HDMI CEC compliant TV using a HDMI cable, it switches automatically to the same menu display language as per your TV setting (if the language set on TV is supported by this product).

[Parental Control]

EN 35

Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings.

To access, enter your last set password or ‘0000’.

Note

•

•

•

Rated discs above the level you set in [Parental Control] require a password to be played.

The ratings are country-dependent. To allow all discs to play, select ‘ 8’ for DVD-video and BD-Video.

Some discs have ratings printed on them but are not recorded with ratings. This function has no effect on such discs.

[Screen Saver]

Turn on or off the screen saver mode. It helps to protect the TV screen from being damaged due to over exposure to static image for being too long.

• [On] - Set the screen saver active after 10 minutes of inactivity (for example, in the pause or stop mode)

• [Off] - Disable screen saver mode.

[Change Password]

Set or change the password.

1) Press the Numeric buttons to enter the password or your last set password. If you forget the password, enter ‘0000’, then press OK.

2) Enter the new password.

3) Enter the same password again.

4) Move to [Confirm] in the menu and press OK.

[Display Panel]

Select a brightness level of the front panel display.

• [Normal] - Normal brightness.

• [Dim] - To dim display.

[Auto Standby]

Turn on or off auto standby mode. It is an energy saving feature.

• [On] - Switch to standby after 30 minutes of inactivity (for example, in pause or stop mode).

36 EN