Listening to Music (Radio, iPod, Aux). COBY electronic CSMP120

listening to Music (radio, iPod, aux)

Listen to AM/FM radio broadcasts, or play your iPod or other auxiliary device.

Tune to a radio station

Turn the Radio Tuning dial to tune to a radio station.

Adjust the antennas as necessary.

Listening to the Radio

Turn the radio on

 FM antenna: Extend the FM antenna wire located on the rear of the unit and position it for optimum reception.

1.

2.

Â

Set the Audio Source switch to RADIO.

Set the Power / Function switch to ON.

Select the radio band (AM, FM, ST)

 AM antenna: The AM antenna is built into the unit. If you are having difficulty receiving an AM station, reposition the unit.

Set the Radio Band switch to one of the following positions.

Operating the radio on a metal surface may adversely affect reception.

 AM: Listen to AM broadcasts.

 FM: Listen to FM mono broadcasts. Choose FM if the broadcast signal is weak.

Do not place the unit near strong magnets such as those used in television sets, speaker boxes, etc. as these may cause the frequency to drift.

 ST: Listen to FM stereo broadcasts. Choose ST for the best sound quality.

Page 9 Listening To Music (radio, Ipod, Aux)

Listening to iPod®

If you have an iPod, you can play and charge it with the integrated dock connector for iPod.

This unit supports the following iPod models.

Made for: iPod touch (2nd generation) iPod touch (1st generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation) iPod classic iPod (5th generation)

Connect your iPod

iPod doesn’t come in just one size or shape. The Universal Dock provides a single, elegant way to connect any iPod with dock connector to your iPod accessory. iPod fits into the Universal Dock through the use of interchangeable inserts called Dock Adapters.

1.

2.

If you have a Dock Adapter, gently press the adapter into the recessed Dock Connector bay. (Dock

Adapters are provided by Apple with their recent iPod models.)

Gently plug your iPod into the Dock Connector. When your iPod is properly connected, the Power icon on your iPod screen should indicate that it is plugged in and charging.

Page 10 Listening To Music (radio, Ipod, Aux)

Turn iPod mode on

1.

2.

Set the Audio Source switch to iPod.

Set the Power / Function switch to ON.

Connect your device

Using a 3.5mm male-to-male audio cable (optional), connect the Headphone Out jack of the device to the Aux In jack located on the rear of the CSMP120.

Using your iPod

 Use the controls available on your iPod (e.g., play/pause, skip next/previous, browse menus).

 Turn the Volume Control dial of the CSMP120 to adjust the volume level.

Turn Aux mode on

1.

2.

Set the Audio Source switch to AUX.

Set the Power / Function switch to ON.

3. Use the controls of the Aux device to turn it on.

Listening to an Auxiliary Device

If you have a device with a 3.5mm headphone jack

(e.g., CD player, MP3 player), you can play it through the speakers of this unit.

You will need a 3.5mm male-to-male audio cable (optional) to use this function.

Using your Aux device

 Use the controls available on your Aux device

(e.g., play/pause, skip next/previous, browse menus).

 If possible, set the volume level of the Aux device to approximately 80%, then turn the

Volume Control dial of the CSMP120 to further adjust the volume level.

Page 11 Listening To Music (radio, Ipod, Aux)