Switching it on for the first time. NOXON iRadio 400+, iRadio M110+, iRadio 460+

NOXON iRadio M110+

(e.g. 192.168.0.1) in your Web browser for it to display a convenient user interface giving you access to all of the router’s options.

Caution – we are here: SSID broadcast (WLAN)

As explained in the technical glossary, the abbreviation SSID stands for the network name sent out to all wireless network devices within range, informing them of the presence of a network with this identification. Some routers, however, have an option to suppress the broadcast of the network name. The option is a toggle that is usually called

SSID broadcast. If the broadcast is disabled, you must know the name in order to enter it manually when setting up the NOXON.

Device ID: the MAC address

The so-called MAC address is a unique identifier assigned to all network devices. The

MAC address is permanently assigned to the device and cannot be modified. It can therefore be used to configure routers to permit only devices with specific MAC addresses to access the network or the Internet. In such a case, it will be necessary to configure the router with the NOXON’s MAC address so that it will be able to establish a network connection and access data in the network. The address can be found on a label on the back of the NOXON.

Sometimes required: a fixed IP

Under certain circumstances, it can be useful for a device to always have the same address. Most networks these days are set up to assign the so-called IP address - the identifier for the TCP/IP protocol - dynamically. In other words, the first time a device connects, the so-called DHCP server assigns it a valid IP address which the device will keep as long as the address is not needed elsewhere.

This occurs completely automatically, without the user’s knowledge. If a network is based on static IPs - i.e. fixed addresses, rather than dynamically assigned ones

- there will generally be a precise set of rules governing the addresses that can be assigned. And our friend the NOXON also has such an IP address. If the network requires a fixed address, the rules for assigning them must be known. But once again, a fixed IP is really the exception; generally, everything happens automatically.

Switching it on for the first time

To start the NOXON, press the ON/OFF button on the NOXON.

Setup wizard

Start now?

After switching on the device, you enter the setup wizard, which helps you set up your NOXON iRadio.

YES NO

66 67