Figure 5 Insert nutbar or spring nut. Liebert D42CIS7018, D42CIS7010SP, D42CIS7018SP, D42CIS7018P2, D42CIS7010P2, D45CIS7018SP, D45CIS7018P2, D52CIS70182, D52CIS7018, D45CIS7010P2

Figure 5 Insert nutbar or spring nut

Press leaf spring and slip edge into T-slot. Flip nutbar as it slides in.

Installation

T-Slot in

Frame

Nutbar in T-Slot

Spring nut oriented for insertion into T-Slot

This end of spring nut flips over and nut slips into T-Slot

T-Slot

Spring nut in T-Slot

3.6

Frame and Enclosure Configurations

3.6.1

Internal Mounting Rails

The Knurr DCM can accommodate rack-mounted or free-standing computer and network equipment.

The unit features 19-inch (483mm) rack rails. These internal front- and rear-mount rails are designed in accordance with the EIA 310D rack standard. The rails are adjustable for installing equipment of different sizes.

Accesories compatible with the 19" rails includes a tool-less fixed shelf (Part # 002185000, L-shaped depth-adjustable support rail (Part # 542777G1), a tool-less telescopic shelf (Part # 535809G1) and a lockable, fully enclosed 2U drawer (Part # 011139278). Each is supplied with installation hardware.

7