General information. Philips OR 2200M, OR2200M


Add to my manuals
25 Pages

advertisement

General information. Philips OR 2200M, OR2200M | Manualzz

14 Product information

Note

• Product information is subject to change without prior notice.

General information

AC power adaptor Model No.: OH-

1015E0591500U1

Brand name: Philips

Input: 100-240 V~,

50/60Hz, 350 mA;

Output: 5.9 V 1.5 A

2 W Operation power consumption

Standby power consumption

Dimensions:

- Main unit

(W x H x D)

Weight:

- Main unit

< 1 W

245 x 123 x 122 mm

1.1 kg

Tuner

Tuning Range

Tuning grid

DAB sensitivity

(EN50248)

Total Harmonic

Distortion

FM: 87.50 - 108.00

MHz;

DAB: 174.928-239.200

MHz

50 kHz

< -95 dbm

< 2%

Signal to Noise Ratio > 50 dBA

Number of preset radio stations

20 (FM), 20 (DAB)

Speakers

Speaker Impedance

Speaker Driver

Sensitivity

4 Ohm

3" full range

> 82x dB/m/W

Amplifier

Output Power

Frequency Response

Signal to Noise Ratio

Audio Input

3 W RMS

60 Hz - 16 kHz,

±3 dB

> 65 dBA

0.5 V RMS 20 kOhm

EN 21

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

How do I turn on the Philips OR 2200M?
Press the power and volume knob.
How do I set the time and date on the Philips OR 2200M?
In standby mode, press and hold the Time/Date button until [Set time] is displayed. Follow the on-screen instructions to set the time and date.
How do I set an alarm on the Philips OR 2200M?
Press and hold the Alarm 1 or Alarm 2 button for two seconds. Follow the on-screen instructions to set the alarm time, source, and volume level.
How do I search for an FM radio station on the Philips OR 2200M?
Press the Source button repeatedly until [FM Mode] is displayed. Press the Tuning knob or the Preset buttons to tune to the desired radio station.
How do I store an FM radio station on the Philips OR 2200M?
Tune to the desired radio station. Press and hold the Preset button until the preset number starts blinking. Press the Preset button to confirm.
How do I connect an external audio device to the Philips OR 2200M?
Connect the audio device to the AUX IN socket using a 3.5mm audio cable. Press the Source button repeatedly until [AUX] is displayed.