- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Uninterruptible power supplies (UPSs)
- APC
- Smart-UPS
- Specification
Advanced menus. APC Smart-UPS
Add to my manuals
28 Pages
APC Smart-UPS provides protection for electronic equipment from utility power blackouts, brownouts, sags, and surges. It also provides battery backup power until utility power returns to safe levels or the batteries are fully discharged. Use the USB or serial port to connect the UPS to a computer and use power management software to monitor the UPS status and configure UPS settings. You can also use the Network Management Card (NMC) to manage the UPS remotely via a network connection.
advertisement
Menu
About
General Functions
Display information about this unit:
• Unit model number
• Serial number
• Battery information
•Model number
•Installation date
•Suggested battery replacement date
•UPS firmware version
Advanced menus
The Advanced menus provide additional options for the UPS and are available only if the display interface is configured to use the Advanced menus.
Menu General Functions
Status
Configuration Configure advanced settings for the UPS:
• MAIN AND SWITCHED OUTLET GROUPS—delays and settings
• High and lower transfer points
• Sensitivity settings
• Date of last battery replacement
• Output voltage
• Battery settings
• Number of battery packs (not available on all models)
• Reset energy meter
• UPS test settings
Control Control the MAIN AND SWITCHED OUTLET GROUPS to turn on, turn off, shutdown, or reboot.
Test & Diags
View detailed information about the UPS:
• Energy meter
• Load current
• Status of the SWITCHED OUTLET GROUP(S)
• Battery voltage
• Efficiency
Log
About
Perform UPS test and diagnostic functions such as user interface testing, battery tests, and battery calibration.
View the event and error logs for information about any changes to the UPS and any faults.
View information about the unit:
• Hardware version
• Software version
• NMC information (if applicable)
• SmartSlot Card information (if applicable)
Smart-UPS X-Series Operation 7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Line-Interactive
- 2.2 kVA 1980 W
- Waveform: Sine
- 8 AC outlet(s)
- Sealed Lead Acid (VRLA)
- Tower Black
Related manuals
advertisement
Table of contents
- 5 Overview
- 5 About the UPS
- 5 Safety
- 5 Product Overview
- 5 Front panel
- 5 Rear panel
- 7 Specifications
- 7 Operating Conditions
- 7 Environmental Specifications
- 7 Installation
- 7 UPS
- 7 Network Management Card
- 7 External Battery Pack
- 8 Operation
- 8 Connect Equipment to the UPS
- 8 Basic Connections
- 10 Display Panel
- 10 Overview
- 10 Using the display interface
- 10 Standard menus
- 11 Advanced menus
- 12 Configuration
- 12 UPS Settings
- 12 Start-up Settings
- 12 General Settings
- 14 Controllable Outlet Groups
- 14 Overview
- 14 Model-specific Controllable Outlet Groups
- 14 Using the Controllable Outlet Groups and UPS outlets
- 16 Customize the Controllable Outlet Groups and the UPS outlets
- 17 Network Management Card Settings
- 18 Emergency Power Off
- 18 Overview
- 18 Normally open contacts
- 18 Normally closed contacts
- 19 Troubleshooting
- 21 Service and Support
- 21 Service
- 21 Transport the unit
- 23 Smart-UPS Factory Warranty
- 23 LIMITED WARRANTY