Care for your product. Philips DCB2020/79, DCB2020

Risk of contamination!

• Remove the battery if it is exhausted or if the remote control is not to be used for an extended period of time.

• Batteries contain chemical substances, they should be disposed of properly.

Care for your product

• Do not insert any objects other than discs into the disc compartment.

• Do not insert warped or cracked discs into the disc compartment.

• Remove the discs from the disc compartment if you are not using the product for an extended period of time.

• Only use microfiber cloth to clean the product.

Care of the environment

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC.

Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Compliance

This apparatus includes this label:

Note

• The type plate is located on the bottom of the apparatus.

Hearing safety

Caution

• To prevent possible hearing damage, do not listen at high volume levels for long periods.

Listen at a moderate volume:

• Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The

EN 3

higher decibel ranges are offered for those that may have already experienced some hearing loss.

• Sound can be deceiving. Over time your hearing 'comfort level' adapts to higher volumes of sound. So after prolonged listening, what sounds 'normal' can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there.

To establish a safe volume level:

• Set your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

Listen for reasonable periods of time:

• Prolonged exposure to sound, even at normally 'safe' levels, can also cause hearing loss.

• Be sure to use your equipment reasonably and take appropriate breaks.

Be sure to observe the following guidelines when using your headphones.

• Listen at reasonable volumes for reasonable periods of time.

• Be careful not to adjust the volume as your hearing adapts.

• Do not turn up the volume so high that you can’t hear what’s around you.

• You should use caution or temporarily discontinue use in potentially hazardous situations.

• Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas.

Notice

Any changes or modifications made to this device that are not expressly approved by

Philips Consumer Lifestyle may void the user’s authority to operate the equipment.

4 EN

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence.

This equipment should not be used for such purposes.

“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet

Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

iPod and iPhone are trademarks of Apple Inc., registered in the U S. and other countries. iPad is a trademark of Apple Inc.

2 Your Micro

Music System

Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Introduction

With this product, you can:

• enjoy audio from discs, USB storage devices, iPod, iPhone, iPad, and other external devices

• listen to radio stations

You can enrich sound output with these sound effects:

• Digital sound control (DSC)

• Dynamic bass boost (DBB)

The product supports these media formats:

What's in the box

Check and identify the contents of your package:

• Main unit

• Speaker X 2

• Rubber bumper for iPad 2

• 2 x AAA batteries

• Remote control

• User manual

• Quick start guide

EN

Overview of the remote control

a b c d e f g h i j k l a b

• Turn on the product.

• Switch to eco-power standby mode or normal standby mode.

• Mute or restore volume.

s r q p o n m

5

c CD

• Select CD source. d /

• Skip to the previous or next track.

• Press and hold to search within a track/disc.

• Tune to a radio station.

e MP3 LINK/USB

• Select MP3 LINK or USB source.

f RDS/DISPLAY

• Synchronize the clock with an RDS radio station that transmits time signals.

• Display the current status or media information.

• Display available ID3 information of

MP3 tracks.

• When playing music from CD or USB storage device, press to display the clock.

g

• Start, pause, or resume play.

• In DAB or FM mode, confirm the menu option.

h VOL +/-

• Adjust the volume level or time.

i Numeric keypad

• Enter numbers.

• Enter the track number to select a track directly.

• Enter the sequence number to select a preset radio station.

j PROG/CLOCK SET

• Program audio tracks.

• Program radio stations.

• Set the clock.

k SLEEP/TIMER

• Set the sleep timer or alarm timer.

l DSC

• Select a preset sound setting.

m DBB

• Turn on or off dynamic bass enhancement.

6 EN n MODE/SCAN

• Select a play mode: normal play, repeat, or shuffle.

• Search for available FM or DAB radio stations.

o /MENU

• Stop the play of music.

• Press twice to erase a program.

• In normal standby mode, turn on or off feature demonstration.

• In DAB or FM mode, access the menu.

• Access the playlist of iPod/iPhone.

p DOCK

• Select the dock source for iPod/ iPhone/iPad.

q OK

• In DAB or FM mode, confirm the menu option.

• In FM mode and with no menu option displayed, switch the sound mode between stereo and monophonic.

• After you select a file from the playlist of iPod/iPhone/iPad, press OK to start play.

r PRESET/ALBUM /

• Skip to the previous or next album.

• Select a preset radio station.

• Navigate through iPod/iPhone/iPad menu.

s DAB/FM

• Select DAB or FM radio source.

a b c d e f g h a Dock for iPod/iPhone/iPad b Disc compartment c e

Overview of the main unit

• USB socket.

• Headphone socket.

i d MP3-LINK

• Connect an external audio device.

f

• Turn on the product.

• Switch to eco-power standby mode or normal standby mode.

g IR sensor

• Receive signals from the remote control.

j k h SOURCE

• Select a source.

i /

• Skip to the previous or next track.

• Press and hold to search within a track/disc.

• Tune to a radio station.

j OK/

• Start, pause, or resume play.

• In DAB or FM mode, confirm the menu option.

• In FM mode and with no menu option displayed, switch the sound mode between stereo and monophonic.

o n m l

EN 7

8 EN k MENU /

• Stop the play of music.

• Press twice to erase a program.

• In normal standby mode, turn on or off feature demonstration.

• In DAB or FM mode, access the menu.

• Access the playlist of iPod/iPhone.

l - PRESET/ALBUM+

• Skip to the previous or next album.

• Select a preset radio station.

• Navigate through iPod/iPhone/iPad menu.

m Display panel

• Display current status.

n

• Eject or close the disc tray.

o VOLUME

• Adjust the volume level or time.

3 Before use

Note

Place the product

Place the speakers at an angle of approximately

45 degrees from the listening position.

• To avoid magnetic interference or unwanted noise, never place this product too close to any radiation devices.

Connect speakers

Note

• Make sure that the colors of the speaker wires and terminals are matched.

• For optimal sound, use the supplied speakers only.

• Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the chapter "Specifications" in this manual.

1

Hold down the socket flap.

2

Insert the stripped part of the wire completely.

• Insert the right speaker wires to "R", left speaker wires to "L".

• Insert the red wires to "+", black wires to "-".

3

Release the socket flap.

Connect power

Caution

• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the product.

• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.

• Before you connect the AC power cord, make sure that you have completed all other connections.

Connect the power plug to the wall outlet.

Install/replace the remote control batteries

Caution

• Risk of explosion! Keep batteries away from heat, sunshine, or fire. Never discard batteries in fire.

1

Open the battery compartment.

2

Insert 2 AAA batteries with correct polarity (+/-) as indicated.

3

Close the battery compartment.

Note

• If you are not going to use the remote control for a long time, remove the batteries.

• Do not use old and new or different types of batteries in combination.

• Batteries contain chemical substances, so dispose of them properly.

EN 9

4 Get started

Caution

• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

Turn on

Press .

» This product switches to the last selected source.

Switch modes

Automatically switch the modes:

• After this product keeps inactive for 15 minutes, it automatically switches to the normal standby mode.

• After this product keeps in the normal standby mode for 15 minutes, it automatically switches to the eco power standby mode.

Manually switch the modes:

• Press and hold to switch this product:

• from the working mode or normal standby mode to the eco power standby mode.

• from the eco power standby mode to the normal standby mode.

• Press to switch this product

• between the working mode and a standby mode.

Note

• When an iPod/iPhone/iPad is connected, this product does not switch to the eco-power standby mode.

Set clock

1

In standby mode, press and hold

PROG/CLOCK SET to activate clock setting.

» [CLOCK SET] (set clock) scrolls on the display, and then [CLOCK 24]

(24-hour time format) is displayed with

"24" blinking.

2

Press / or VOL +/- to select

[CLOCK 24] or [CLOCK 12] (12hour time format), and then press

PROG/CLOCK SET.

» The hour digits begin to blink.

3

Press / or VOL +/- to set the hour.

4

Press PROG/CLOCK SET again.

» The minute digits begin to blink.

5

Press / or VOL +/- to set the minute.

6

Press PROG/CLOCK SET to confirm the clock setting.

» The set clock is displayed.

• To exit clock setting without storing, press .

Note

• If no button is pressed in 90 seconds, the system exits clock setting mode automatically.

Tip

• To adjust the digits of hour or minute, you can also turn the VOLUME knob or press PRESET/ALBUM +/- on the main unit.

Demonstrate features

1

In normal standby mode, press .

• [WELCOME TO PHILIPS] (welcome to Philips) scrolls on the display, and then feature names one by one.

2

To exit the feature demonstration, press

again.

10 EN