advertisement
For machine types: 30A2 and 30A3
Dimensions
Width: 102 mm (4.02 inches)
Height: 338 mm (13.31 inches)
Depth: 375 mm (14.76 inches)
Weight
Maximum configuration as shipped: 7.8 kg (17.20 lb)
Environment
• Air temperature:
Operating: 10°C to 35°C (50°F to 95°F)
Storage: -40°C to 60°C (-40°F to 140°F) in original shipping package
Storage: -10°C to 60°C (14°F to 140°F) without package
• Humidity:
Operating: 20% to 80% (non-condensing)
Storage: 20% to 90% (non-condensing)
• Altitude:
Operating: -15.2 to 3048 m (-50 to 10 000 ft)
Storage: -15.2 to 10 668 m (-50 to 35 000 ft)
Electrical input
• Input voltage:
– Low range:
Minimum: 100 V ac
Maximum: 127 V ac
Input frequency range: 50 to 60 Hz
– High range:
Minimum: 200 V ac
Maximum: 240 V ac
Input frequency range: 50 to 60 Hz
Lenovo programs
Your computer comes with Lenovo programs to help you work more easily and securely. Depending on the Windows operating system preinstalled, the programs might vary.
Accessing Lenovo programs on the Windows 7 operating system
You can access Lenovo programs on the Microsoft Windows 7 operating system through Windows Search or from Control Panel. The icon name displayed in the search result or Control Panel might be different from the program name. You can find the program by its program name or icon name as shown in the Lenovo programs available on the Windows 7 operating system table.
Note: If you do not find the program you need, open the Lenovo ThinkVantage ® dimmed icon for the program. Then double-click the icon to install the program.
Tools program to find the
To access Lenovo programs through Windows Search, do the following:
30 ThinkStation E32 Hardware Maintenance Manual
1. Click the Start button and then type the program name or the icon name into the search box.
2. Locate the program by the program name or the icon name and then click the program to launch it.
To access Lenovo programs from Control Panel, do the following:
Note: Some Lenovo programs might not be displayed in Control Panel. To find these programs, use
Windows Search.
1. Click Start ➙ Control Panel. Change the view of Control Panel from Category to Large icons or Small icons.
2. Locate the program by the icon name and then click the program to launch it.
The following table lists the programs available on the Windows 7 operating system.
Note: Depending on your computer model, some of the Lenovo programs might not be available.
Table 1. Lenovo programs available on the Windows 7 operating system
Program name
Lenovo Reach
Lenovo SHAREit
Lenovo Solution Center
Recovery Media
Rescue and Recovery ®
System Update
Icon name
Lenovo Reach
Lenovo SHAREit
Lenovo - System Health and Diagnostics
Lenovo - Factory Recovery Disks or Create Recovery Media
Lenovo - Enhanced Backup and Restore
Lenovo - Update and Drivers
Accessing Lenovo programs on the Windows 8 or Windows 8.1 operating system
If your computer is preinstalled with the Windows 8 or Windows 8.1 operating system, you can access
Lenovo programs by doing one of the following:
• On the Windows 8 operating system, press the Windows key to go to the Start screen. Click a Lenovo program to launch it. If you cannot find the program you need, move the pointer to the bottom-right corner of the screen to display the charms. Then click the Search charm to search for the desired program.
• On the Windows 8.1 operating system, press the Windows key to go to the Start screen. Click a
Lenovo program to launch it. If you cannot find the program you need, click the arrow icon in the bottom-left corner of the screen to go to the Apps screen. Find the desired program in the apps list or search for it in the search box in the top-right corner of the screen.
Depending on your computer model, your computer supports some of the following Lenovo programs:
• Lenovo Companion
• Lenovo Reach
• Lenovo SHAREit
• Lenovo Solution Center
• Lenovo Support
• Lenovo Tools
31
advertisement
Key Features
- Workstation Black 240 W
- Intel® Core™ i5 i5-4570 3.2 GHz
- 4 GB DDR3-SDRAM 1600 MHz
- 500 GB HDD
- Intel® HD Graphics 4600
- Ethernet LAN 10,100,1000 Mbit/s
- Windows 7 Professional 64-bit
Related manuals
advertisement
Table of contents
- 7 Important safety information
- 9 General safety
- 9 Electrical safety
- 11 Safety inspection guide
- 11 Handling electrostatic discharge-sensitive devices
- 12 Grounding requirements
- 12 Safety notices (multi-lingual translations)
- 35 Specifications
- 35 For machine types: 30A0 and 30A1
- 36 For machine types: 30A2 and 30A3
- 36 Lenovo programs
- 36 Accessing Lenovo programs on the Windows 7 operating system
- 37 Accessing Lenovo programs on the Windows 8 or Windows 8.1 operating system
- 38 Lenovo Support Web site
- 39 Problem determination tips
- 41 Basic troubleshooting
- 42 Accessing Control Panel on the Windows 8 or Windows 8.1 operating system
- 42 Troubleshooting procedure
- 43 Troubleshooting
- 43 Audio problems
- 45 CD problems
- 46 DVD problems
- 47 Intermittent problems
- 47 Hard disk drive problems
- 48 Keyboard, mouse, or pointing device problems
- 50 Monitor problems
- 52 Networking problems
- 55 Option problems
- 55 Performance and lockup problems
- 57 Printer problems
- 58 Serial port problems
- 58 Software problems
- 59 USB problems
- 59 Diagnostics
- 60 Lenovo Solution Center
- 60 UEFI diagnostic program
- 61 Starting the Setup Utility program
- 61 Viewing and changing settings
- 61 Using passwords
- 62 Password considerations
- 62 Power-on password
- 62 Administrator password
- 62 Setting, changing, and deleting a password
- 62 Erasing lost or forgotten passwords (clearing CMOS)
- 63 Enabling or disabling a device
- 63 Selecting a startup device
- 63 Selecting a temporary startup device
- 64 Selecting or changing the startup device sequence
- 64 Enabling ErP LPS compliance mode
- 65 ICE performance mode
- 65 ICE thermal alert
- 66 Changing the BIOS settings before installing a new operating system
- 66 Exiting the Setup Utility program
- 67 RAID Level
- 67 Configuring the system BIOS to enable SATA RAID functionality
- 67 Creating RAID volumes
- 68 Deleting RAID volumes
- 68 Resetting disks to non-RAID
- 69 Hard disk drive boot error
- 69 Power supply problems
- 69 Beep symptoms
- 70 POST error codes
- 72 Miscellaneous error conditions
- 73 Undetermined problems
- 75 For machine types: 30A0 and 30A1
- 75 Locating connectors, controls, and indicators on the front of your computer
- 76 Locating connectors on the rear of your computer
- 77 Locating major FRUs and CRUs
- 79 Looking up FRU information
- 80 Locating parts on the system board
- 82 Locating internal drives
- 82 For machine types: 30A2 and 30A3
- 83 Locating connectors, controls, and indicators on the front of your computer
- 84 Locating connectors on the rear of your computer
- 85 Locating major FRUs and CRUs
- 87 Looking up FRU information
- 88 Locating parts on the system board
- 90 Locating internal drives
- 91 Handling static-sensitive devices
- 91 Installing or replacing hardware
- 91 Installing external options
- 92 Removing the computer cover
- 93 Removing and reinstalling the front bezel
- 94 Installing or replacing a PCI card
- 97 Installing or replacing a memory module
- 99 Installing or replacing the optical drive
- 101 Installing or replacing the card reader
- 105 Replacing the front audio and USB assembly
- 108 Replacing the battery
- 109 Replacing the power supply assembly
- 111 Replacing the heat sink and fan assembly
- 113 Installing the solid-state drive
- 114 Installing or replacing the mSATA solid-state drive
- 120 Replacing the internal speaker
- 121 Replacing the thermal sensor
- 123 Replacing the front fan assembly
- 125 Replacing the rear fan assembly
- 127 Replacing the cover presence switch
- 129 Replacing the primary hard disk drive
- 131 Replacing the secondary hard disk drive
- 133 Installing the tertiary hard disk drive
- 137 Replacing the microprocessor
- 139 Replacing the system board
- 142 Replacing the Wi-Fi units
- 149 Installing or removing the rear Wi-Fi antenna
- 150 Installing or removing the front Wi-Fi antenna
- 152 Replacing the keyboard or mouse
- 153 Completing the parts replacement
- 155 Handling static-sensitive devices
- 155 Installing or replacing hardware
- 155 Installing external options
- 156 Removing the computer cover
- 157 Removing and reinstalling the front bezel
- 158 Accessing the system board components and drives
- 158 Installing or replacing a memory module
- 160 Installing or replacing a PCI card
- 162 Installing or replacing the card reader
- 167 Replacing the battery
- 168 Installing the solid-state drive
- 169 Installing or replacing the mSATA solid-state drive
- 175 Replacing the hard disk drive
- 177 Installing or replacing the secondary hard disk drive
- 184 Replacing the Wi-Fi units
- 189 Installing or removing the rear Wi-Fi antenna
- 190 Installing or removing the front Wi-Fi antenna
- 193 Replacing the optical drive
- 195 Replacing the heat sink and fan assembly
- 198 Replacing the power supply assembly
- 203 Replacing the microprocessor
- 206 Replacing the cover presence switch
- 208 Replacing the internal speaker
- 210 Replacing the front audio and USB assembly
- 212 Replacing the system fan
- 214 Replacing the thermal sensor
- 216 Replacing the power switch
- 218 Replacing the system board
- 222 Replacing the keyboard or mouse
- 222 Completing the parts replacement
- 225 Security features
- 225 Hardware controlled passwords
- 225 Operating system password
- 225 Vital product data
- 225 BIOS levels
- 225 Flash update procedures
- 226 Updating (flashing) the BIOS from a disc
- 227 Updating (flashing) the BIOS from your operating system
- 227 Recovering from a POST/BIOS update failure
- 228 Power management
- 228 Advanced configuration and power interface (ACPI) BIOS
- 228 Automatic Power-on features
- 232 Television output notice
- 232 European conformance CE mark
- 232 Trademarks