Self-Timer
The self-timer can be used in situations such as group shots. When using this option, you should either mount the camera on a tripod (recommended) or rest it on a flat, level surface.
1. Secure the camera to a tripod or place it on a stable surface.
3. Press the power switch to turn on the power.
4. Press the four-way controller (
S/
) and use (
S) to select your desired self-timer mode. You can also change the setting using four-way controller ( WX).
5. Press the button to confirm the setting.
6. Compose your scene and press the shutter release button.
The self-timer function is activated.
The photograph is then taken after the preset time.
To cancel the self-timer at any time, press the four-way controller (
S/
) or press the shutter release button halfway.
EN-36
The table below will help you choose the appropriate self-timer mode:
Self-timer mode
2
2 sec. Self-timer
Description
The image is captured about 2 seconds after the shutter is pressed. This mode is useful for preventing camera shake.
10
10 sec. Self-timer The image is captured about 10 seconds after the shutter is pressed. This mode is suitable for the shots in which the photographer has to be included.
10+2 sec. Self-timer The first image is captured about 10 seconds after the shutter release button is pressed, and then the second image is captured 2 seconds later. This mode is convenient when capturing group images in succession. Flash does not fire in this mode.
After one shot is taken, the self-timer mode is turned off.
If you wish to take another image using the self-timer, repeat these steps.
EN-37
