Self-Timer. Pentax Optio E-10, Optio E10

Self-Timer

The self-timer can be used in situations such as group shots. When using this option, you should either mount the camera on a tripod (recommended) or rest it on a flat, level surface.

1. Secure the camera to a tripod or place it on a stable surface.

3. Press the power switch to turn on the power.

4. Press the four-way controller (

S/

) and use (

S) to select your desired self-timer mode. You can also change the setting using four-way controller ( WX).

5. Press the button to confirm the setting.

6. Compose your scene and press the shutter release button.

„ The self-timer function is activated.

„ The photograph is then taken after the preset time.

„ To cancel the self-timer at any time, press the four-way controller (

S/

) or press the shutter release button halfway.

EN-36

The table below will help you choose the appropriate self-timer mode:

Self-timer mode

2

2 sec. Self-timer

Description

The image is captured about 2 seconds after the shutter is pressed. This mode is useful for preventing camera shake.

10

10 sec. Self-timer The image is captured about 10 seconds after the shutter is pressed. This mode is suitable for the shots in which the photographer has to be included.

10+2 sec. Self-timer The first image is captured about 10 seconds after the shutter release button is pressed, and then the second image is captured 2 seconds later. This mode is convenient when capturing group images in succession. Flash does not fire in this mode.

„ After one shot is taken, the self-timer mode is turned off.

„ If you wish to take another image using the self-timer, repeat these steps.

EN-37