Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing the power switch.
2. Press the four-way controller ( X) to select the [Set-up2] menu, then use the four-way controller ( T) to select [USB Con.].
3. Press the button.
4. Use the four-way controller ( T) to select [PC], then press the button.
5. Turn off your camera.
6. Connect your camera and the computer via the supplied USB cable.
7. Turn your camera on by pressing the power switch.
8. There will be a new “Removable Disk” icon detected in “My
Computer”, which contains your recorded images or movie clips.
(For Mac users, double-click [untitled] or [unlabeled] disk drive icon on our desktop.)
PC/AV terminal
EN-62
Step 3: Download images or movie clips
When the digital camera is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the “Removable disk”
(“untitled” or “unlabeled” disk on a Macintosh) to your computer hard drive.
Windows
Open the “removable disk” and double click on the DCIM folder to open it to find more folders. Your images are inside these folder(s). Select the desired still images or movie clips and then choose “Copy” from the
“Edit” menu. Open the destination location (folder) and choose “Paste” from the “Edit” menu. You may also drag and drop image files from the digital camera to a desired location.
Macintosh
Open the “untitled” disk icon, and the destination location on your hard disk. Drag and drop from the digital camera to the desired destination.
SD memory card users may prefer to use an SD memory card reader (highly recommended).
EN-63
