Removing the LCD Module. Aspire Digital 8730Z, 8730, 8530

Removing the LCD Module

1.

See “Removing the Battery Pack” on page 54.

2.

See “Removing the SD dummy card” on page 55.

3.

See “Removing the ExpressCard dummy card” on page 56.

4.

See “Removing the Lower Cover” on page 56.

5.

See “Removing the TV Tuner Board Modules” on page 58.

6.

See “Removing the TV Tuner Board Modules” on page 58.

7.

See “Removing the Middle Cover” on page 73.

8.

See “Removing the Keyboard” on page 74.

9.

Turn over the system and remove the two screws (A) from the bottom of the left and right hinges.

84

1~2

Step Size (Quantity)

M2.5 x L8 (2) Black

Color Torque

3.0 kgf-cm

Chapter 3

10. Turn over the system and remove the mylar covering the LCD cable connector.

11. Disconnect the LCD cable connector from the main board.

Chapter 3 85

12. Carefully pull out the wireless antenna cables from the hole and release the cables from the latches.

86

13. Disconnect the microphone cable from MIC1 on the system and release it from the latches.

Chapter 3