Printing (DMP mode). Canon Microfilm Scanner 350II, 350II

CE-IE-335-01 43

■ Printing (DMP mode) ■

Printing (DMP mode)

The following describes the printing procedure in the DMP mode.

1.

Make necessary settings on the main unit.

2.

Select the paper size that you want to print on.

■ Using the Fileprint 270

If using the Fileprint 270, select paper size set on the multi-purpose tray.

(1) Press the Cassette Select key or the Clear/Stop key for about 3 seconds to enter the paper size setting mode. The current paper size then appears on the Print/Error display.

Display Setting

A4

Letter

B5

Legal

(2) When you press the plus (+) key of the Print Number Setting key, the display changes as A4➞11➞b5➞14 in due order, and if you press the minus (–) key, 14➞b5➞11➞A4 in due order.

(3) Press the Clear/Stop key to define the paper size that you want to use.

■ Using the Fileprint 470

If using the Fileprint 470, select a paper cassette or the multipurpose tray to use.

(1) Press the Clear/Stop key for about 5 seconds to enter the paper

-cassette select mode. The current paper cassette then appears on the Print/Error display.

Keyboard Display Print/Error Display Tray selection

Multi-purpose tray selected

Upper cassette selected

Lower cassette selected

(2) When you press the plus (+) key on the Print Number Setting key, the display changes as C0➞C1➞C2➞C0 in due order, and if you press the minus (–) key, C0➞C2➞C1➞C0 in due order.

(3) Press the Clear/Stop key to define the paper size that you want to use. The Print/Error display then returns to “01.”

43

07.5.14, 14:20

■ Printing (DMP mode) ■

If using the multi-purpose tray, set paper size of the multi-purpose tray.

(1) Press the Cassette Select key for about 2 seconds to enter the paper cassette select mode. When the multi-purpose tray lamp

( ) begins to blink, you can now set paper size. At that time, the current paper size appears on the Print/Error display.

(2) Press the Print Number Setting key (+ or –) to set the appropriate paper size.

The size indicator will be displayed on the Print/Error display as follows:

Display Setting

A4

Letter

B5

Legal

(3) Press the Cassette Select key to complete the setting.

3.

Set the number of prints that you want to make (1 to 99).

Press the Print Number Setting key on the operation panel or the operation keyboard to set the number of prints. If you press the plus (+) key, the number increases, and if you press the minus (–) it decreases.

If you want to change the number you have already set, press the Clear/Stop key (C/ ) to reset the number to 1, and then set the number of prints you want to make once again.

4.

Make the Print mode settings if required.

5.

Press the Print key on the operation panel or the operation keyboard to start printing.

You can cancel printing at any time by pressing the

Stop/Clear key (C/ ).

CE-IE-335-01

44

44 07.5.14, 14:20