Safety Warnings. Echo ECS-2000

WARNING ICON

!

G 001

SAFETY WARNINGS

This saw has low-kickback chain, reduced-kickback guide bar and kick guard. These items reduce the chances of kickback. Do not remove kick guard. The kick guard prevents rotational kickback.

Read and understand all Safety Warnings on pages

3 and 4. Improper use of this chain saw can cause severe injury or death from fire, electrical shock, body contact with moving chain, or falling wood.

This saw has a chain brake. When kickback occurs, the front hand guard is moved forward by the back of operator’s left hand. This stops the saw chain quickly, reducing the chance of serious injury.

BEFORE OPERATING CHAIN SAW

1. Read and understand this owner’s manual before operating chain saw.

2. Use chain saw for cutting wood only. Do not use for cutting any non-wood items.

3. Only well-instructed adults should operate chain saw. Never allow children to operate chain saw. First-time user should obtain informed, practical instruction in addition to reading this manual. Practice cutting logs on a saw horse or cradle.

4. Use only electrical voltage noted on model plate of chain saw.

5. Use only extension cords marked for outdoor use. See page

8 for extension cord requirements.

6. Do not operate chain saw

• while under the influence of alcohol, medication, or drugs

• in rain or in damp or wet areas

• where highly flammable liquids or gases are present

• if saw is damaged, adjusted wrong, or not fully assembled

• if trigger does not turn saw on and off. Chain must stop moving when you release trigger. Have faulty switch replaced by authorized service person.

• while tired or in a hurry

• while in tree or on a ladder unless trained to do so

7. Wear snug-fitting clothes when operating chain saw. Do not wear loose clothing or jewelry. They can get caught in moving saw chain.

8. Wear the following safety gear when operating chain saw:

• heavy-duty gloves (wear rubber gloves if working oudtoors)

• steel-toed safety footwear with non-skid soles

• eye protection such as safety glasses, goggles, or face screen

• safety hard hat

• ear mufflers or ear plugs

• hair covering to contain long hair

• face or dust mask (if working in dusty areas)

9. Before cutting, always provide the following:

• clear work area

• secure footing

• planned retreat path from falling tree

10.Inspect tree before cutting down. Make sure there are no dead limbs or branches that may fall on you.

11.To reduce the risk of electric shock, this saw has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet of your extension cord, reverse the plug. If it still does not fit, a polarized extension cord will be necessary. Do not change the plug in any way.

KICKBACK

WARNING ICON

!

G 001

WARNING

Avoid Kickback. Kickback can cause you to lose control of chain saw. Kickback can cause severe injury or death.

102514

Never hold the chain saw by the front hand guard.

Cause Of Kickback

Kickback may occur when nose or tip of guide bar touches an object while chain is moving. If chain cutter catches on object, a sudden reverse action will result. The guide bar will kick up and back towards operator.

Direction

90 °

Quadrant

Do Not Let

Guide Bar Nose

Touch Here

Figure 1 - Kickback Hazard Example. Do Not Let Nose of

Guide Bar Touch Object While Chain is Moving

Kickback may also occur when wood pinches chain at guide bar nose. A sudden reverse action will also result.

3

The following steps will reduce the risk of kickback:

• Use both hands to grip saw while saw is running. Use firm grip. Thumbs and fingers must wrap around saw handles.

• Keep all safety items in place on saw. Make sure they work properly.

• Do not overreach or cut above shoulder height.

• Keep solid footing and balance.

• Stand slightly to left side of saw. This keeps your body from being in direct line with chain.

• Do not let guide bar nose touch anything when chain is moving (see Figure 1).

• Do not remove kick guard.

• Never try cutting through two logs at same time. Only cut one log at a time.

• Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose).

• Watch for shifting of wood or other forces that may pinch chain.

• Use extreme caution when re-entering a previous cut.

• Use low-kickback chain and guide bar supplied with this chain saw. Only replace these parts with chains and guide bars listed in this manual or on the chain saw.

• Never use dull or loose chain. Keep chain sharp and tensioned correctly.

3

Continued