How to use this guide. Energizer 715, 515

How to use this guide

NOTE -

This User Guide shows sample screens only. Your pump screens may be slightly different.

For step-by-step instructions, refer to the appropriate sections in this guide. See the Glossary for

definitions of terms and functions. The terms and symbols used in this guide are in the table below.

Term / symbol

“Press”

“Hold”

Meaning

To push and release the pump button

To push and keep pressure on the pump button

“Select” To choose an item in a list on the pump screen using the / buttons

“Exit the menus”

To leave the current pump menu and return to the HOME screen by pressing the ESC button until the HOME screen appears

Pump Buttons Always bold and uppercase (for example, ESC , ACT )

Screen and menu names Always uppercase; for example, MAIN MENU, REWIND screen

Menu selections Always bold; for example, 12-Hour Setup , On , Off

flashing (blinking) screen item

NOTE and TIP

CAUTION:

WARNING:

“Go to the...screen.”

You can change the value for that item with the

/

1.

From the MAIN MENU, select Utilities and press ACT .

2.

In the UTILITIES MENU, select Alarm and press ACT .

buttons

Additional helpful information

Warns of a potential hazard which, if not avoided, may result in minor or moderate damage to the equipment

Notifies you of a potential hazard which, if not avoided, could result in death or serious injury. It may also describe potential serious adverse reactions and safety hazards

When a step instructs you to “Go to” a screen, the path to that screen is shown. For example:

Go to the ALARM MENU.

Main > Utilities > Alarm

3.

The ALARM MENU appears.

6 Chapter: 1