TECHNICAL DATA
Technical data
346XP/XPG/E-tech/Triobrake 353/G/E-tech/Triobrake
Motor
Cylinder displacement, cu.in/cm
3
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/ rpm
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US pint/litre
Oil pump capacity at 9,000 rpm, ml/min
Oil tank capacity, US pint/litre
Type of oil pump
Weight
Chain saw without bar or chain, empty tanks, lb/kg
3,06/50,1
1,74/44,3
1,28/32,5
2700
2,7/9600
NGK BPMR 7A/ Champion RCJ
7Y
NGK BPMR 7A/ Champion RCJ
7Y
0,02/0,5 0,02/0,5
1,06/0,5
5-12
0,59/0,28
Automatic
3,15/51,7
1,77/45
1,28/32,5
2700
2,4/9000
1,06/0,5
5-12
0,59/0,28
Automatic
346XP: 5,1
346XPG: 5,2
346XP E-tech: 5,1
346XPG: 5,2
353: 5,2
353G: 5,3
353 E-tech: 11,0/5,0
353G E-tech: 5,3
Chain/bar
Standard bar length, inch/cm
Recommended bar lengths, inch/cm
Usable cutting length, inches/cm
Pitch, inch/mm
Thickness of drive links, inch/mm
Drive sprocket type/teeth
Chain speed at max. power, m/sec
13"/33
13-20"/33-50
12-19"/31-48
0,325/8,25
0,050/1,3
0,058/1,5
Rim/7
18,5
13"/33
13-20"/33-50
12-19"/31-48
0,325/8,25
0,050/1,3
0,058/1,5
Rim/7
17,3
Recommended original and replacement bar and chain combinations
The following is a list of recommended cutting equipment for chain saws 346XP, 346XPG, 346XP E-tech, 346XPG Etech TrioBrake et 353, 353G, 353 E-tech, 353G E-tech, TrioBrake. The combinations of power head, bar and chain have been investigated in accordance with the kickback and vibration requirements of ANSI B175.1–2000.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding maximum nose radius of a solid bar.
The following list is the chain saw manufacturers recommendations. There may be other combinations available, which will also achieve kickback reduction.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth may be considered to have equivalent kickback energy. A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent or less kickback energy than the sprocket-nose bar.
English – 39
TECHNICAL DATA
Bar and chain combinations
Low kickback saw chain is a chain which has only met the kickback performance requirements of ANSI B 175.1 safety requirements for gasoline powered chain saws when tested on the representative sample of chain saws below 3.8 cu. in. specified in ANSI 175.1. We recommend that you as a replacement use the listed chains or "Low kickback saw chains" which are available at your dealer.
Length, inch
13
15
16
18
20
13
15
16
18
20
Pitch, inch
0,325
0,325
0,325
0,325
0,325
0,325
0,325
0,325
0,325
0,325
Bar
Gauge, inch
1,3
1,5
Max. nose radius
10T
10T
10T
10T
10T
10T
10T
10T
10T
12T
Type
Husqvarna H30
Husqvarna H25
Chain
Drive link count
56
64
66
72
78
56
64
66
72
78
Note: For the chains above you are free to choose between 0,050" and 0,058" gauge drive link for the corresponding bar, see the table below.
0,050"/1,3 mm
0,058"/1,5 mm -
H30 H22
H25
Saw chain filing and file gauges
40 – English
