Viewing the Available Wireless Station List. Netgear WG302v2, PROSAFE WG302v2
Add to my manuals
102 Pages
advertisement
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
Viewing the Available Wireless Station List
The Available Wireless Station List contains a table of all IP devices associated with the wireless access point for the Wired Network Name (SSID)
From the WG302v2 main menu, under the Information heading, click Available Wireless Station
List to view the list.
For each device, the Available Wireless Station List table shows the Station ID, MAC address, IP
Address, and Status (whether the device is allowed to communicate with the wireless access point or not).
Figure 3-7
If the wireless access point is rebooted, the table data is lost until the wireless access point rediscovers the devices. To force the wireless access point to look for associated devices, click the
Refresh button.
Note: A wireless network can include multiple wireless access points that use the same network name (SSID). This extends the reach of the wireless network. Users can roam from one access point to another, providing seamless network connectivity. If this is the case, only the stations associated with this access point are shown in the
Available Station List.
3-10 v1.0, May 2006
Management and Information
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 13 Conventions, Formats and Scope
- 14 How to Use This Manual
- 14 How to Print this Manual
- 17 Key Features
- 17 Supported Standards and Conventions
- 18 WG302v2 Key Features
- 19 Compatible and Related NETGEAR Products
- 20 What’s In the Box?
- 21 Hardware Description
- 21 Front Panel
- 22 Rear Panel
- 23 System Requirements
- 24 Wireless Equipment Placement and Range Guidelines
- 25 Installing the ProSafe 802.11g Wireless Access Point
- 29 Logging in to the WG302v2 Using Its Default IP Address
- 30 Basic IP Settings
- 32 Wireless Settings
- 34 Understanding WG302v2 Wireless Security Options
- 35 Configuring Security Profiles
- 37 Profile Definition
- 37 Network Authentication
- 38 Data Encryption
- 39 Wireless Client Security Separation
- 39 VLAN ID
- 41 SSID and Wireless Security Settings Form
- 42 Configuring the RADIUS Server Settings
- 43 Restricting Wireless Access by MAC Address
- 45 Changing the Administrator Password
- 46 Remote Management
- 47 Using the Secure Telnet Interface
- 47 Accessing the CLI by Using the Console Port
- 48 CLI Commands
- 48 Upgrading the Wireless Access Point Firmware
- 49 Configuration File Management
- 50 Backing up and Restoring the Configuration
- 50 Erasing the Configuration
- 50 Using the Reset Button to Restore Factory Default Settings
- 51 Viewing General Information
- 53 Viewing the Activity Log
- 54 Viewing the Available Wireless Station List
- 55 Viewing Statistics
- 56 Rogue AP Detection
- 59 Configuring Advanced IP Settings for Wireless Clients
- 61 Configuring Hotspot Settings
- 61 Configuring Advanced Wireless Settings
- 62 Configuring Wireless LAN Parameters
- 63 Modifying QoS Queue Parameters
- 65 Wireless Bridging and Repeating
- 67 Point-to-Point Bridge Configuration
- 68 Multi-Point Bridge Configuration
- 69 Repeater with Wireless Client Association
- 73 No lights are lit on the access point.
- 74 The Wireless LAN activity light does not light up.
- 74 The LAN light is not lit.
- 74 I cannot access the Internet or the LAN with a wireless capable computer.
- 75 I cannot connect to the WG302v2 to configure it.
- 75 When I enter a URL or IP address I get a timeout error.
- 76 I am unable to download files from some FTP sites.
- 76 I need to restore factory default settings.
- 79 Default Factory Settings
- 82 Specifications for the WG302v2
- 83 Accessing CLI TAB Completion Help
- 84 Keyboard Shortcuts
- 85 Interface Naming Conventions
- 86 Entering CLI Commands
- 87 Using the CLI to Configure the ProSafe 802.11g
- 88 Viewing General Information
- 89 Configuring Basic Settings
- 90 Configuring Wireless Settings
- 91 Configuring Security Profile Settings
- 94 RADIUS Server Settings
- 95 Access Control
- 96 Viewing and Configuring Management Settings
- 97 Viewing and Configuring System Information
- 98 Configuring Advanced IP Settings
- 99 Hotspot Settings
- 99 Advanced Wireless Settings
- 101 Advanced Access Point Settings