1.3 RESETTING THE HOURS METER OF THE UV LAMP. Nortec MH SERIES

1.3 RESETTING THE HOURS METER OF THE UV LAMP

After replacing the UV lamp (option) the hours meter of the UV lamp must be reset.

Note: If the hours meter of the UV lamp is not reset within 168 hours the UV maintenance warning an error message is triggered.

Select the maintenance menu:

Path: Main menu > User > Password entry: 8808

> Maintenance

Select “Module A”, then press the <Set> key.

Select "UV lamp Rst”, then press the <Set> key.

The reset dialogue shows up in the display.

Press the <Yes> key to reset the hours meter of

the UV lamp.

Note: Press the <Esc> or <No> key if you wish to abort the reset procedure.

To return to the standard operating display press the <Esc> key several times.

10-20

Page 26

2008-12-03

10-30

TROUBLESHOOTING

10-30

Page 27

2008-12-03