Unpacking. Powermatic PJ882, 1610079

Powermatic PJ882 is an 8-inch Parallelogram Jointer that is perfect for any woodworker. It features a powerful 1.5 HP motor which provides ample power for jointing even the most challenging hardwoods. The large 8-inch wide table provides plenty of support for your workpieces, and the parallelogram design ensures that your cuts are always accurate. The PJ882 also comes with a number of safety features, including a cutterhead guard and a dust collection system, to help keep you safe while you work.

Unpacking

Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Jointer is assembled and running properly.

Compare the contents of your container with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.

Contents of the Shipping Container

1 Jointer

1 Combination wrench (8-10 mm)

2 Hex wrenches (3mm and 5 mm)

1 Aluminum knife gauge

Read and understand the entire contents of this manual before attempting set-up or operation! Failure to comply may cause serious injury.