INSERT THE CARD. Sanyo DVP-P1U

DVP-P1_E.book Page 27 Wednesday, July 23, 2003 3:20 PM

SETUP

INSERT THE CARD

Cards that can be used with this printer

i The cards listed below can be used with this printer: i Only one card can be inserted at a time.

h SD Memory Card/MultiMedia Card h CompactFlash/Microdrive h SmartMedia (except for SmartMedia cards that operate at 5V) h Memory Stick (An adapter is required to use Memory Stick Duo.)

Note that only card data which was recorded in the DCF compliant format can be printed. Image data which was saved on a computer cannot be printed.

How to insert the card

1

Turn on the power (see page 21).

2

Open the card slot cover.

Card slot cover

English

27

DVP-P1_E.book Page 28 Wednesday, July 23, 2003 3:20 PM

SETUP

3

Insert the card.

h Choose the correct slot for your type of card.

h Take care that the card is oriented correctly, and firmly push it all the way in.

Slot A: SmartMedia, SD Memory Card,

MultiMedia Card, Memory Stick

Slot B: CompactFlash, Microdrive h When a card is inserted, the MEMORY CARD indicator will light.

MEMORY CARD indicator

Slot A

Slot B

4

Close the card slot cover.

How to remove the card

1

Open the card slot cover.

2

Pull out the card.

h The MEMORY CARD indicator will go out.

3

Close the card slot cover.

CAUTION i Do not remove the card while the MEMORY CARD indicator is flashing or in the middle of printing.

28

English