Preparations before Use. Tekxon Technology V5300

3． Preparations before Use

3.1 Battery Installation

Install the battery by following the steps:

Fig.3-1

‚ Open the battery cover by sliding it downwards.

‚ Place the battery into the compartment.

‚ Ensure the metal contacts of the battery are in the same orientation as the battery contacts in the battery compartment.

‚ Charge the battery before use. (See “ Charge Battery” section for details)

Do not remove the battery when the video camera is in use.

3.2 Use external power supply

Fig.3-2 Fig.3-3

‚ Connect the connector of the AC adapter to the USB connector on the camera.

‚ Press the Power switch to turn on the camera, and it will work as it does with a battery.

‚ Battery charging: place the battery to be recharged into the camera. Connect

8