• Troubleshooting. Tribest HU1020, HU-1020-A, Humio HU1001, Humio Hu1020

| TROuBlESHOOTING |

Possible Reason Possible Solution Symptom

Unit does not turn on • Unit not plugged in

• No power at outlet

• Plug unit in

• Try a different outlet

Little or no mist is produced • Unit not plugged in

• No power at outlet

• No or less water in tank

• Unit is not level

• Plug unit in

• Try a different outlet

• Fill the water tank

• Set unit on a flat level surface

• Water tank is not on properly • Position the points to meet

at center

• Water Tank Cap is clogged • Push the water tank cap

spring to release water from

Smelly mist • New machine

the tank. Rinse the tank and

change the water.

• Wrong button was pushed or • Push the water tank cap

wrong setting was chosen spring to release water from

the tank. Rinse the tank and

change the water.

• Clean the unit before use and

let stand for 12 hours

• Dirty water or stale water • Replace the water with clean

Vibrating noises

White dust on surfaces

• Tank in incorrect position • Position the points to meet

at the center

• No or less water in tank • Fill the Water Tank

• Unit is not level

• Hard water used

• Unit is dirty

• Set unit on a flat level surface

• Use distilled water

• Perform weekly maintenance

10